Farmi Forest CH27 ACC, Operation, Maintenance And Spare Parts Manual

Page: 59 / 128

59 CH27 ACR & ACC
STOPPING THE CHIPPER
Slow the tractor engine speed to idle before disengaging
the PTO. This is especially important with tractors fea-
turing a PTO brake. Turn the PTO control lever slowly
to the OFF position.
When the chipper is shut down, the
cutting disk continues to rotate -
just like a flywheel - after the PTO
has been disengaged.
Please wait until the disk has stop-
ped completely before performing
any further actions.
The chipper requires approx. 9 minutes to slow
down from maximum speed to complete stop (1000
rpm -> 0 rpm).
FIXED SAFETY SWITCH
LOCATION AND USE OF SAFETY SWITCHES
If necessary, the feed can be shut off using a safety switch.
The feeder device will stop immediately when the safety
switch is pressed. Note! The rotor will continue rotating.
A fixed safety switch is located on the chipper's upper
housing next to the winch. The other moveable safety
switch is to be placed in the cab of the tractor feeding
wood, within easy reach of the operator.
WARNING