Farmi Forest CH27 ACC, Operation, Maintenance And Spare Parts Manual

Page: 61 / 128

61 CH27 ACR & ACC
ITEM ACTION
MAINTENANCE
INTERVAL
NOTES
Chipper frame and knife
units
Tighten pins and nuts Weekly All pins and nuts must be tightened
after the first operating hour! For
the torques, see the table.
Check twig breaker and
additional knife
At the time of
knife maintenance
Check the twig breaker and the
additional knife for breakage.
Hydraulic system Replacement of
the return filter
500 h
Oil change 1500 h First oil change after 80 operating
hours!
Check belt 250 h If necessary, tighten according to
instructions.
Check hydraulic hoses and
joints
Daily
Grease nipple:
1. PTO drive shaft
Lubricate Daily See separate instructions
2. Rotor bearing Lubricate 50 h 5-6 pump strokes / bearing
3. Swing bearing of the
roller swing
Lubricate 50 h
4. Bearing of
the feeding device
Lubricate 50 h
5. Discharge pipe Lubrication 50 h
Electrical system Check lines and
connectors.
Weekly
Lubricate electrical con-
nectors
250 h Spray anti-oxidant onto the con-
nectors.
Feed unit Inspecting the feed chain
tension
50 h If necessary, tighten according to
instructions.
Check the sliding
plates for damage.
50 h
MAINTENANCE ITEMS