Farmi Forest CH27 ACC, Operation, Maintenance And Spare Parts Manual

Page: 24 / 128

24 CH27 ACR & ACC
CH27ACR / CH27ACC
LIFTING
Lifting points for each machine are
marked with hook symbols.
1. Lift only using the proper type of lifting device and ensu-
re that it has an appro-priate lifting capacity.
2. Check the lifting slings, cables, and chains regularly.
3. Ensure that you know the weight of the load to be lifted
and never exceed the lifting capacity stated by the
manufacturer of the lifting device.
4. Select the transport routes for lifting so that the load
is not transported over people or a location where
people might be.
LIFTING POINTS
PALLET FORKS
WINCH HOOK
ANCHOR POINT
LIFTING THE DISCHARGE PIPE
WITH THE WINCH
The winch on the chipper’s upper
housing is only intended for use in
lifting and lowering the discharge
pipe.
Exercise caution when using the winch.
When the winch is under load, maintain a firm grip
on the crank - do not let go. If the crank handle is
left unlocked, the crank can begin to spin uncont-
rollably and cause injury.
Lock the discharge pipe rotation before lifting or
lowering it. The pipe must always be rotated so that
the winch hook anchor point is directly facing the
winch, i.e. the pipe must be facing straight out to
the side. Otherwise, it will not be safe to lift.
LOCKING THE
DISCHARGE PIPE
ATTENTION
ATTENTION