Farmi Forest CH27 ACC Operation, Maintenance And Spare Parts Manual Download Page 22

Page: 22 / 128

CH27 ACR & ACC

6. Lifting point sticker (41014270)

7. SPEED sticker (40141160)

Recommended speed range.

The rated speed must not be exceeded.

8. MAXIMUM Hydraulic pressure (41015580)

9. Sticker CH27 (200001868)

10. Sticker (200001871)

11. Caution!

The feed unit is designed for grab loader feed.

Manual loading is strictly prohibited!

It is strictly prohibited for the machine operators

and other personnel to stay in the danger

zone during operation.

There is a risk of being drawn into the feed unit

and into the chipper.

With the machine in operation, the danger

zone extends over 20 meters. (30146990)

Summary of Contents for CH27 ACC

































































































































Search results

Summary of Contents for CH27 ACC

Reviews:

Related manuals for CH27 ACC

Brands by name

Popular brands

Farmi Forest CH27 ACC, Operation, Maintenance And Spare Parts Manual

Search results

Summary of Contents for CH27 ACC

Reviews:

Related manuals for CH27 ACC

Brands by name

Popular brands