57
CH27 ACR & ACC
CHIPPING
During chipping, please observe the
following safety instructions:
1. Always read the operating and safety instructions of the
used feed unit before operating the chipper.
2. The danger zone of the chipper is approx. 20 m.
3. Chipper with grab loader feed: During operation, neither
the operator nor other people may stay in the dan-
ger zone. The chipper is operated from the driver
seat in the tractor’s safety cab. Before engaging the
tractor PTO and starting the feed unit, make sure no
one is in the chipper’s danger zone. During operati-
on, the danger zone must be safeguarded to prevent
unauthorized people from entering the danger zone
If necessary, operation must be interrupted. Turn off
the feed unit and disengage the tractor’s PTO before
you leave the safety cab. It is strictly prohibited to
manually load a chipper which is designed for grab
loader feed!
4. The operator of a chipper with grab loader feed must
wear an ear protection, cut resistant safety boots and
required protective clothing.
5. Never hold any part of the body into the feed hopper or
into another part of the chipper with the machine
running.
6. Before feeding in the material to be chipped, ensure that
the wood fed into the chipper is free from metal or
soil (such as nails, stones, etc.).
7. Do not use the chipper at temperatures below -20 °C.
This is to avoid damage due to brittleness – especi-
ally of the knives –caused by the cold.
8.
Avoid chipping wood that is frozen solid; therwise, ex
-
cessive stress will be exerted on the chipper and self-
feeding will be impaired.
9.
FIRE HAZARD! Always keep adequate fire-fighting equip
-
ment on hand when using the chipper. Regularly
check the surface temperature of the chipper. If
the chipper suddenly heats up abnormally, stop the
chipper and determine the cause of overheating. Re-
gularly, check the temperature of the bearings. Pay
special attention to careful maintenance, and keep the
chipper free from dust. If the chipper starts smoking,
pour water into the feed hopper.
WARNING
Summary of Contents for CH27 ACC
