Farmi Forest CH27 ACC, Operation, Maintenance And Spare Parts Manual

Page: 62 / 128

62 CH27 ACR & ACC
8h
8h
20h
Lubricate the shield tubes in
wintertime to prevent them
from freezing and sticking.
Lubricate the outer profile tube’s
inner surface.
h = working hours
Swing the joints sideways for lubrication.
LUBRICATING THE BEARINGS
1. The bearings are lubricated at the factory, and a simi-
lar lubricant should be used for subsequent lubricati-
on (Shell Alvania Grease R 3. or Kendall L427). An
excessive amount of grease causes overheating and
impairs lubrication.
2. Lubricate the bearings after 50 working hours. The
correct amount of lubricant is 5-6 presses / lubrica-
tion/bearing.
LUBRICATING THE PTO SHAFT
1. Lubricate the PTO shaft prior to operation and regu-
larly, as shown in picture.
2. Lubricate the inner surface of the PTO shaft, accessed
via the outer profile tube.
3. Lubricate the shield tubes in wintertime to prevent
them from freezing and sticking.