Fanvil X7 User Manual Download

Page: 56 / 162

Picture 40 - Set call forward

8.12 Call

Transfer

When the user is talking with a remote party and wish to transfer the call to another

remote party, there are three way to transfer the call, blind transfer, attended transfer and

Semi-Attended transfer.

Blind

transfer

Do not need to negotiate with the other side, directly transfer the call

to the other side.

Semi-Attended

transfer.

When you hear the ring back, transfer the call to the other

party.

Attended

transfer

When the caller answers the call, transfer the call to the caller.

Note

For more transfer Settings, please refer to

12.6 Line >> Dial Plan

8.12.1

lind transfer

During the call, the user presses the function menu button [

Transfer

] or the transfer

button on the phone

, Enter the number to transfer or press the contact button or the

history button to select the number, press the transfer key again or blind transfer

a third party. After the third party rings, the phone will show that the transfer is successful

and hang up.

Summary of Contents for X7



































































































































































Search results

Summary of Contents for X7

Reviews:

Related manuals for X7

Brands by name

Popular brands

Fanvil X7, User Manual

Search results

Summary of Contents for X7

Reviews:

Related manuals for X7

Brands by name

Popular brands