Fanvil X7 Page 51 User Manual Download

Page: 51 / 162

Picture 31 - X7C Enable DND

Phone

interface

᧶

Default standby mode. Pressing the "do not disturb" status bar

will prompt the "do not disturb" icon. The color of the icon will not change when

pressed.

Picture 32 - X7 Enable DND

If the user wishes to enable/disable the uninterrupted function on a specific line, the user

can set the uninterrupted function on the page of configuring the line.

1) Press [

Menu

] >> [

Features

] >> [

Basic

] >> [

DND

] button, Enter the [

DND

]

editing interface.

2) Click the left/right navigation button to select the line to adjust the mode and

state of "do not disturb", and then press the [

] button to save.

3) The user will see the DND icon turn red, and the sip-line has enabled the mode

of "DND".

Summary of Contents for X7



































































































































































Search results

Summary of Contents for X7

Reviews:

Related manuals for X7

Brands by name

Popular brands

Fanvil X7, User Manual

Search results

Summary of Contents for X7

Reviews:

Related manuals for X7

Brands by name

Popular brands