Fanvil X7 User Manual Download

Page: 85 / 162

9.8.2

MWI

Message Waiting Indicator

If the service of the lines supports voice message feature, when the user is not available

to answer the call, the caller can leave a voice message on the server to the user. User

will receive voice message notification from the server and device will prompt a voice

message waiting icon on the standby screen.

Picture 81 - New Voice Message Notification

Voice message icon

To listen to a voice message, the user must first configure the voicemail number. After

the voicemail number is configured, the user can retrieve the voicemail of the default

line.

When the phone is in the default standby state,

The Side Key is pre-installed with a voice message shortcut key - [

MWI

] key.

Press

[

MWI

] to open the voice message configuration interface, and select the line

to be configured by pressing the up/down navigation buttons.

Press

the

[

Edit

] button to edit the voice message number. When finished, press the

[

] button to save the configuration.

In the following picture, “1

” in front of Fanvil line brackets represents unread voice

messages, and “1

” represents the total number of voice messages.

Summary of Contents for X7



































































































































































Search results

Summary of Contents for X7

Reviews:

Related manuals for X7

Brands by name

Popular brands

Fanvil X7, User Manual

Search results

Summary of Contents for X7

Reviews:

Related manuals for X7

Brands by name

Popular brands