manualshive.com logo in svg

Fanvil X7, User Manual, Page: 16 / 162

Share
Download
Fanvil X7 User Manual Download Page 16

 

 

 

5

 

5 Install 

Guide 

5.1 Use  PoE  or  external  Power  Adapter 

X7&X7C

,  called  as  ‘the  device’  hereafter,  supports  two  power  supply  modes,  power  supply  from 

external power adapter or over Ethernet (PoE) complied switch. 

 

PoE power supply saves the space and cost of providing the device additional power outlet. With a 

PoE switch, the device can be powered through a single Ethernet cable which is also used for data 

transmission. By attaching UPS system to PoE switch, the device can keep working at power outage 

just like traditional PSTN telephone which is powered by the telephone line. 

 

For users who do not have PoE equipment, the traditional power adaptor should be used. If the 

device is connected to a PoE switch and power adapter at the same time, the power adapter will be 

used in priority and will switch to PoE power supply once it fails. 

 

Please use the power adapter supplied by Fanvil and the PoE switch met the specifications to 

ensure the device work properly. 

 

Summary of Contents for X7



































































































































































Reviews:

No comments