Fanvil X7 User Manual Download Page 37

Page: 37 / 162

The user can conduct line configuration on the interface of the phone or the webpage, and input the

corresponding information at the registered address, registered user name, registered password

and SIP user, display name and registered port respectively, which are provided by the SIP server

administrator.

Phone

interface

To manually configure a line, the user can press the line key for a long time, or

press the button in the function menu [

Menu

] >> [

Advanced Settings

] >> [

Accounts

] >>

[

Basic

] configuration, click

to save the configuration.

NOTICE! User must enter correct PIN code to be able to advanced settings to edit line

configuration. (The default PIN is 123)

The parameters and screens are listed in below pictures.

Picture 11 - Phone line SIP address and account information

Picture 12 - Phone display name and port

WEB

interface

After logging into the phone page, enter [

Line

] >> [

SIP

] and select

SIP1/SIP2/SIP3/.../SIP18/SIP19/SIP20

for configuration, click apply to complete registration

Summary of Contents for X7



































































































































































Search results

Summary of Contents for X7

Reviews:

Fanvil X7, User Manual, Page: 37 / 162

Search results

Summary of Contents for X7

Reviews: