Fanvil X7 User Manual Download

Page: 122 / 162

111

Picture 129 - Firmware upgrade information display

Table 18 - Firmware upgrade

Parameter

Description

Upgrade server

Enable Auto Upgrade

Enable automatic upgrade, If there is a new version txt

and new software firmware on the server, phone will

show a prompt upgrade message after Update Interval.

Upgrade Server Address1

Set available upgrade server address.

Upgrade Server Address2

Set available upgrade server address.

Update Interval

Set Update Interval.

Firmware Information

Current Software Version

It will show Current Software Version.

Server Firmware Version

It will show Server Firmware Version.

[Upgrade] button

If there is a new version txt and new software firmware

on the server, the page will display version information

and upgrade button will become available; Click

[Upgrade] button to upgrade the new firmware.

New version description

information

When there is a corresponding TXT file and version on

the server side, the TXT and version information will be

displayed under the new version description information.

The file requested from the server is a TXT file called vendor_model_hw10.txt.Hw

followed by the hardware version number, it will be written as hw10 if no difference

on hardware. All Spaces in the filename are replaced by underline.

The URL requested by the phone is HTTP:// server address/vendor_Model_hw10

.txt

The new version and the requested file should be placed in the download

directory of the HTTP server, as shown in the figure:

Summary of Contents for X7



































































































































































Search results

Summary of Contents for X7

Reviews:

Related manuals for X7

Brands by name

Popular brands

Fanvil X7, User Manual

Search results

Summary of Contents for X7

Reviews:

Related manuals for X7

Brands by name

Popular brands