Fanvil X7 User Manual Download Page 61

Page: 61 / 162

Picture 47 - Local conference setting

Two ways to create a local conference

The device has two channels of communication. Press the conference button on

the call interface. When selecting the conference number, select the other

number that already exists.

Picture 48 - Local conference

If the device has a call all the way, press the conference key in the call interface,

enter the number to join the meeting and press the call; After the opposite end is

answered, press the conference button again to set up the local tripartite

conference

Picture 49 - Local conference

Note

During the conference, press the split button to split the conference and press the

end button to end the call.

8.14.2

Network Conference

Users need server support for network conference.

Line

] >> [

SIP

] >> [

Basic settings

], set the conference mode

as server mode (default is local mode), set the server conference room number (please

consult your system administrator), as shown in the figure

Summary of Contents for X7



































































































































































Search results

Summary of Contents for X7

Reviews:

Fanvil X7, User Manual, Page: 61 / 162

Search results

Summary of Contents for X7

Reviews: