Fanvil X7 User Manual Download Page 128

Page: 128 / 162

117

each call, the value of voice and video port is

added 2.

RTP Port Quantity

Number of calls.

12.2 Network

VPN

Users can configure a VPN connection on this page. See

10.7.2.3 VPN

for more details.

12.3 Network

Advanced

Advanced network Settings are typically configured by the IT administrator to improve

the quality of the phone service. For configuration, query the

10.7 advanced

Settings.

12.4 Line

SIP

Configure the Line service configuration on this page.

Table 20 - Line configuration on the web page

Parameters

Description

Register Settings

Line Status

Display the current line status at page loading.

To get the up to date line status, user has to

refresh the page manually.

Activate

Whether the service of the line is activated

Username

Enter the username of the service account.

Authentication User

Enter the authentication user of the service

account

Display Name

Enter the display name to be sent in a call

request.

Authentication Password

Enter the authentication password of the service

account

Realm

Enter the SIP domain if requested by the service

provider

Server Name

Input server name.

Summary of Contents for X7



































































































































































Search results

Summary of Contents for X7

Reviews:

Fanvil X7, User Manual, Page: 128 / 162

Search results

Summary of Contents for X7

Reviews: