manualshive.com logo in svg

Fanvil X7, User Manual, Page: 50 / 162

Share
Download
Fanvil X7 User Manual Download Page 50

 

 

 

 

39 

upper right corner after cancel

.The phone mute icon is off 

8.9 Call  Hold/Resume 

The user can press the [

Hold

] button to maintain the current call, and this button will 

become the [

Resume

] button, and the user can press the "resume" button to restore the 

call. 

 

Picture 30 - Call hold interface 

8.10 DND 

User may enable Do-Not-Disturb (DND) feature on the device to reject incoming calls 

(including call waiting). The DND can be enabled on line basis. 

 

Enable/Disable phone all lines DND, Methods the following

᧶

 

z

 X7C 

Phone 

interface

᧶

Default standby mode

᧨

 

1) Press 

[

DND

] button to enter the DND setting interface, select line or phone to 

enable DND, the icon will become red

. 

2)

 Press 

[

DND

] button to enter the DND setting interface and disable DND, the 

icon will be become blue

.

 

Summary of Contents for X7



































































































































































Reviews:

No comments