Fanvil X7 User Manual Download Page 125

Page: 125 / 162

114

11 Web Configurations

11.1 Web

Page

Authentication

The user can log into the web page of the phone to manage the user's phone information

and operate the phone. Users must provide the correct user name and password to log

in.

11.2

System >> Information

User can get the system information of the device in this page including,

Model

Hardware

Version

Software

Version

Uptime

And summarization of network status,

Network

Mode

MAC

Address

Subnet

Mask

Default

Gateway

Besides, summarization of SIP account status,

SIP

User

SIP account status (Registered / Unapplied / Trying / Timeout )

11.3 System

Account

On this page the user can change the password for the login page.

Users with administrator rights can also add or delete users, manage users, and set

permissions and passwords for new users.

11.4

System >> Configurations

On this page, users with administrator privileges can view, export, or import the phone

configuration, or restore the phone to factory Settings.

Summary of Contents for X7



































































































































































Search results

Summary of Contents for X7

Reviews:

Fanvil X7, User Manual, Page: 125 / 162

Search results

Summary of Contents for X7

Reviews: