Lumina 35
House setup
29
HOUSE SETUP
→
tab page
Combi
M/MT-part
Setting indicating if the controllable part of the ventilation control consists of linear
controllable fans (
LINEAR
) or modulating on/off fans (
RELAY
).
Analog extra additional
Setting indicating the number of analog (linear controllable) fans that you want to
activate as extra fans in the controllable part. (only if
LINEAR
has been chosen at
M/MT-part
)
Relay extra switching
Setting indicating the number of on/off fans that you want to activate as extra fans in the
controllable part. (only if
LINEAR
has been chosen at
M/MT-part
)
Vortex damper in use
Setting indicating if vortex damper control is used. A vortex damper is always controlled
analog. There is one vortex damper control per extra switched fan. (only if
LINEAR
has
been chosen at
M/MT-part
)
Ventilation system
Setting indicating which ventilation system is used in the house.
House type
Setting indicating which type of ventilation is used in the house.
Air inlet in use
Setting indicating the number of air inlets to be used.
Tunnel inlet in use
Setting if tunnel inlet control is used.
Natural inlet in use
Setting indicating the number of natural air inlets to be used.
Number of stages M/MT-
phase
Setting indicating the number of stages to be used in the combi-table.
Number of stages T-
phase
Setting indicating the number of stages to be used in the combi-table.
Number of relays
Setting indicating the number of relays you want to use for the extra fans.
Use warm climate table
Setting indicating if a separate warm climate table is used.
Temperature offset
Setting indicating the temperature offset (only if warm climate table is used).
Switch delay
Setting indicating the switch delay time between the 'normal tunnel inlet' and the 'warm
climate tunnel inlet' (mm:ss) (only if warm climate table is used).
Summary of Contents for Lumina 35
Page 1: ...g...
