Faema X2 GRANDITALIA, User Manual

Page: 59 / 100

English English
12 January 2005
wednesday 15:15:04
T steam: 050°C
The message "T steam xxx°C"
appears on the display, indicating
the temperature read by the probe.
Note:
If the milk is frothed, the symbol appears beside "Steam T :
xxx°C". If the milk is warm, the symbol appears beside
"Steam T : xxx°C" .
Time out is set at 180" for both the programming modes.
The message "T steam xxx°C"
appears on the display, indicating
the temperature read by the probe.
The temperature detected by the probe will appear again on the
display once the thermocouple functions again.
12 January 2005
wednesday 15:15:04
T steam: 064°C
MODE 1, STEAM AUTOMATIC STOP
A temperature is set at the “T stop steam xxx°C" field using the "+"
and "-" keys, with "xxx" which ranges from a minimum of 40°C
(104°F) and a maximum of 85°C (185°F).
Steam dispensing is started using: the
A
or
B
buttons, the knob (
13
).
In particular:
- milk is frothed using the
A
button and the knob (
13
) (clockwise)
- milk is heated using the
B
button and the knob (
13
) (counter-
clockwise)
N.B.:
When the set temperature is reached,
steam supply stops
automatically
and the display continues indicating steam value
for the next 3 seconds.
Steam dispensing can be stopped at any moment (even if the set
temperature has not been reached), by pressing again either button
A
or button
B
, or turning the automatic steam knob (
13
) in the same
direction used for activating supply.
MODE 2, STEAM MANUAL STOP
Set the temperature value on item "T stop steam xxx°C" at "000" zero.
Steam dispensing and the choice of milk t ype are performed as in
MODE 1.
Note: The user controls when steam dispensing is stopped
,
once the desired temperature has been reached, it will act upon the
A
or
B
buttons, or on the automatic steam knob (
13
) in the same
direction used for activating supply.
For the next 3" after steam dispensing has stopped, the display
shows the milk temperature that has been reached.
BEVERAGE TEMPERATURE READING
The steam probe also detects the beverage temperature, but only
if it is higher than 50°C. Inset the steam nozzle (
15
) into the container,
making sure the tip is completely submerged in the milk. After a few
seconds the phrase "T steam: xxx°C", corresponding to the probe
reading, appears.
When the steam nozzle is removed from the milk, the phrase remains
on the display for the following 3 seconds.
To view the temperature in Fahrenheit degrees, please refer to the
"configuration menu -Measurement unit".
If the thermocouple is malfunctioning, the Error Log will list the ES-
053 error. The latest set temperature value is, however, saved until
thermo-couple operation is restored. The machine works as if it is
in the STOP STEAM mode. You can froth or heat milk, but during the
process, the display will show:
Automatic steam knob/button programming
Once you have selected TURBOSTEAM, use the “+” and “-“ keys to
position the cursor on the T STOP STEAM line, and press the PRG key. You may now program the automatic steam function, by setting a
“xxx°C” temperature value for either hot or whipped milk.
Setting options:
"0" setting:
• manual steam stop
Any number between "40°C ÷ 85°C" (104°F ÷ 185°F)
• automatic steam stop
"OFF" setting:
• steam stop disabled
8. Autosteam -
Programming function
+
u
u
! TURBOSTEAM
T stop steam 072°C
regulator YES
12 January 2005
wednesday 15:15:04
T steam: - - - °C
B
hot
milk
A
frothed
milk
!
"
hot
milk
frothed
milk
13