Faema X2 GRANDITALIA, User Manual

Page: 60 / 100

English English
Washing options - Automatic washing
Depending on the selected setting (
OFF/10÷99
), the automatic wash
is changed.
Setting "autom. washing OFF":
• timed automatic wash cycle is disabled;
• when the button (
28
) is pressed, the milk circuit washing
cycle is performed.
Setting "autom. washing 10...99":
• the timed automatic wash cycle is activated and the set time
interval starts;
• when the button (
28
) is pressed, the milk circuit washing
cycle is performed.
The cycle starts automatically. The time interval is set between 10 and
99 minutes. The timer starts at the end of each milk dispensing phase.
When the time runs out, the automatic wash cycle begins.
30" before the timer stops, the LEDs on the keys of the cappuccino maker
unit start blinking. The display appears as follows:
During this standby phase:
If the coffee dispensing key is pressed, the counter will start again
30" from the end of the dispensing cycle (per use);
If a milk/cappuccino key is pressed, the counter will start again from
the set time (10' + 99');
If the key (
28
) is pressed, the automatic washing cycle will be
immediately performed.
08 September 2004
wednesday 15:15:04
******************************************
AUTOMATIC WASHING
28
******************************************
-
type
: indicates type of wash cycle that will be performed. Long
wash (milk circuit with detergent and coffee circuit with tablet),
short wash (automatic milk wash cycle + fast wash coffee cycle).
"WASH 1" only performs the long cycle.
-
coffee stop
: when the function (YES) is set, if the wash cycle
does not take place within 60' (30' if short washing) from the
moment that the "EXECUTE WASHING GROUP" message appears,
the machine is blocked and all selections for coffee are inhibited.
-
milk stop
: when the function (YES) is set, if the wash cycle
does not take place within 60' (30' if short washing) from the
moment that the "EXECUTE WASHING MILK CIRCUIT" message
appears, the machine is blocked and all selections for milk are
disabled.
NOTE: if the "block coffee" and "block milk" entries are set to NO for
the 'WASH 1" cycle, the machine will never be blocked.
WASH 1 cycles that are not carried out are recorded in the WASH 1
LOG ("
i
" key
27
), as "failed".
These are wash cycles set at programmable times, each with four
changeable parameters, which are:
Washing options - Washing 1, 2, 3
-
hour
: when the wash cycle must be performed.
"WASH 1" cannot be disabled. It is requested daily at the
programmed hour and within 24 hours..
WASH 2 and 3 can be disabled and set to OFF.
+
u
u
!
WASH1
hour 15:30
type long
coffee stop YES
milk stop YES
9. Washing options
WASHING OPTIONS -
includes four sub-menus for setting washing
parameters:
+
u
u
! WASHING OPTIONS
autom. washing 30
WASH1
WASH2
WASH3
(Where is present)
The ideal setting for milk frothing is set in the factory. If additional
adjustments must be made, turn the flow adjustment valve (
A
)
underneath the panel control of the machine:
- counterclockwise: more air > more frothy milk
- clockwise: less air > less frothy milk
Note: even slight turns of the valve (A) can make a great
difference in how the milk is frothed.
A