Faema X2 GRANDITALIA, User Manual

Page: 43 / 100

English English
Press one of the mixed chocolate dispensing keys ( 32 ). The
related LED remains on and does not blink. The display
appears as follows:
+
u
u
!
KEY MENU
Type 1 chocolate
repetition 001
dispen. type step
tot time disp. 12.0s
on time disp. 3.0s
off time disp. 1.0s
H2O delay 3.0s
The following mixed chocolate selection parameters can be
modified:
- repetition (it represents the number of distributions of the
selected drink, from 001 to 099);
- dispen. type
(dispenser type, 2 setting options of the cacao
powder dispensing:
continuous: continuous powder distribution for the time set
in
"tot time disp.";
step: step powder distribution, where "on time disp." indicates
the powder distribution time and
"off time disp." the off time);
- tot time disp. (total time dispenser, 0 ÷ 30 seconds with
increments of 0.1; it represents the time of distribution of the
dispenser, correspondent at the total time of activation in
continuous modality);
- on time disp. (time of activation of the dispenser, 0 ÷ 5
seconds with increments of 0.1; only in step modality);
- off time disp. (off time of the dispenser, 0 ÷ 5 seconds with
increments of 0.1; only in
step modality);
- H2O delay (water time distribution after the time of distribution
of the dispenser, 0 ÷ 5 seconds with increments of 0.1).
- Milk dose (milk dispensing time: 0 ÷ 60 seconds, with
increments of 0.1);
- Emulsion
(foamed milk dispensing time, from 0 to 60, with
increments of 0.1 seconds);
- cold milk dose (cold milk dose; from 0 to 20 with increments
of 0.1 seconds);
- Water dose (volumetric dosage pulses: 0 ÷ 999, with
increments of 1)
- Coffee dose MSx (left grinder encoder pulses: 0 ÷ 200, with
increments of 1)
- Coffee dose MDx (right grinder encoder pulses: 0 ÷ 200, with
increments of 1)
3.5 Key menu - Mixed chocolate selection (where contemplated)
Only on machines with the TURBOSTEAM system, without
flow regulator.
If the frothed milk key is pressed or the frothed milk knob (
13 )
is turned, the following appears on the display:
The following parameters can be modified:
- emulsion level (here 4 levels can be chosen, where 001 is
less emulsion and 004 is continuous emulsion).
+
u
u
! KEY MENU
Type steam and air
emulsion level 003
3.7 Key menu - Steam and air selection (where contemplated)
Press the hot water dispensing key ( 12 ). The following
message will appear on the display:
The following hot water selection parameters can be
modified:
- water dispensing time (from 0 to 60, with increments of
0.1 seconds).
+
u
u
! KEY MENU
Type water
Water dose 05.0
3.6 Key menu - Hot water selection