English
English
(
**
)
Start milk/Start coffee function
By setting:
"
Start milk 00
" - milk dispensing takes place when the selection key
is pressed. After a few seconds, coffee is dispensed;
"
Start milk 99
" or at a high setting that exceeds the coffee
dispensing time - milk dispensing starts after coffee is dispensed.
"
Start milk 05
" - coffee dispensing starts, and 5 seconds after the
selection key is pressed, milk is dispensed.
Note: If the time setting exceeds the coffee dispensing time, milk
dispensing begins immediately after coffee is dispensed.
"
Start coffee 00
" - Coffee dispensing starts after milk is dispensed.
"
Start coffee 99
" or any setting other than 0 - coffee dispensing will
start 99 seconds (or after the set time) after milk is dispensed.
You can use the"+" (
30
) and "-" (
31
) keys to change the "
Start milk
"
setting (milk dispensing start delayed after coffee dispensing and
vice versa) from "
00
" to "
99
" with "
1
" second increments.
If over "
99
" is set, the "Start milk" setting will become the "
Start
coffee
" setting (coffee dispensing start delayed after the milk
dispensing), then the setting returns to "Start milk" in a cycle.
The default settings for
cappuccino selections are:
Start milk 00.
Start Milk
Start Coffee
00
99
00
99
5.2 Key menu - Cappuccino selection
Press one of the cappuccino dispensing keys (
32
). The related LED
remains on and does not blink. The display appears as follows:
Cappuccino selection parameters that can be changed are:
-
Type
(personalization key, i.e., 1 cappuccino, 2 coffees, 2
cappuccinos, milk, short washing, stop, disable);
-
Milk dose
(milk dispensing time: 0 ÷ 60 seconds, with increments
of 0.1);
-
Milk start/coffee start
** (milk dispensing delayed after coffee
dispensing, and vice versa)
-
Emulsion
(foamed milk dispensing time, from 0 to 60, with
increments of 1 second);
-
HM/FM
(this parameter lets you decide which type of milk (frothed
or regular) to dispense first.
YES: regular milk – frothed milk
NO: frothed milk – regular milk.
-
Emulsion stop
YES/NO (with the “emulsion stop” function set
(YES): foamed milk dispensing time, from 0 to 58, with increments of
1 second. The maximum setting time is always 2 seconds less
respect “milk dose”);
-
Water dose
(volumetric dosage pulses: 0 ÷ 999, with increments
of 1)
-
Coffee dose MSx
(left grinder encoder pulses: 0 ÷ 200, with
increments of 1)
-
Coffee dose MDx
(right grinder encoder pulses: 0 ÷ 200, with
increments of 1)
-
backing
(the return time for the chamber, which can be adjusted
for each key: from 0 to 6 with increments of 0.1 seconds.)
-
infusion
(infusion time: 0 ÷ 6 seconds, with increments of 0.1)
-
pressure release
(pressure release time: 0 ÷ 5 seconds, with
increments of 0.1)
-
drying
(pod drying time; 0 ÷ 5 seconds, with increments of 0.1).
Note: the coffee doses for both grinders set in the technical
programming menu, are subject to change in the customer
programming menu within a range of + 10 of the set value.
5.1 Key menu - Milk selection
Press one of the milk dispensing keys (
32
). The related LED remains
on and does not blink. The display appears as follows:
Milk selection parameters that can be changed are:
-
Type
(personalization key, i.e., 1 cappuccino, 2 coffees, 2
cappuccinos, milk, short washing, stop, disable);
-
Milk dose
(milk dispensing time: 0 ÷ 60 seconds, with increments
of 0.1);
-
Emulsion
(foamed milk dispensing time, from 0 to 60, with
increments of 1 second);
-
HM/FM
(this parameter lets you decide which type of milk (frothed
or regular) to dispense first.
YES: regular milk – frothed milk
NO: frothed milk – regular milk;
-
Emulsion stop
YES/NO (with the “emulsion stop” function set
(YES): foamed milk dispensing time, from 0 to 58, with increments of
1 second. The maximum setting time is always 2 seconds less
respect “milk dose”);
+
u
u
+
u
u
!
KEY MENU
Type
milk
Milk dose
07.0
Emulsion
05.0
HM/FM
YES
emulsion stop
YES
!
KEY MENU
Type
1 cappuccino
Milk dose
04.0
Coffee start
10
Emulsion
02.0
HM/FM
YES
emulsion stop
YES
Water dose
100
Summary of Contents for X2 GRANDITALIA
