Faema X2 GRANDITALIA, User Manual

Page: 40 / 100

English English
1. Clock adjustment
2. Meter display and reset
Use the “+” ( 30 ) and “-” ( 31 ) keys to adjust the clock.
The time increases (or decreases) one minute each time
the key is pressed.
The time changing speed increases if one of the keys (
30 or
31 ) is kept depressed. The date setting will change whenever
the time setting indicates “00:00”.
19 April 2006
wednesday 15:15:04
Press key “ i ” ( 27 ) to display the meters.
The following message will appear on the display ( 5 ):
To access the various menus, position the cursor on the line
that interests you, using the “
+ ” ( 30 ) or “ - ” ( 31 ) keys.
Press the PRG ( 29 ) key and then press the " + " ( 30 ) and " - " ( 31 )
keys to reset the number. The meter will be reset.
When the " OK " key is pressed, zeroing is confermed. The total
number of coffees, the total value for the Msx grinder, the total
value for the Mdx grinder, the number of cycles and the hours
of machine life cannot be zeroed.
At this point, depending on the machine model:
- press the
RES ( 24 ) key to confirm and return to the previous
menu;
or
- press the “
OK ” key to confirm and the RES ( 24 ) key to return
to the previous menu.
+
u
u
!
COUNTERS MENU
N° coffee 25
N° milk 15
N° water 10
N° steam 5
N° steam+air 9
N° tot coffee 56
N° cycles 95
3. How to access the programming mode
Press the RES key ( 24 ) to quit the programming phase.
If the " Customer Progr. " is set to " NO ", the following message
will appear on the display:
N.B. ONLY if the item “ Customer Progr. ” is set on “ YES " and
the item “ Program. block ” is set on “ NO ".
To access programming press the PRG ( 29 ) key; the following
message will appear on the display:
!!!!!!!!!!!!!!!!!!!!
CUSTOMER PROG.
NOT ENABLED!
!!!!!!!!!!!!!!!!!!!!
!
CUSTOMER PROG.
KEY MENU