![background image](http://html1.mh-extra.com/html/faac/daab-ep105/daab-ep105_instruction-manual_3113213005.webp)
INSTRUCTION MANUAL DAAB AUTOMATIC CONTROL UNIT EP105
5
Revision 3
Safety
CAUTION
: Important safety instructions Following these instructions is important for
personal safety Retain these instructions
!
Carefully read through this instruction manual in its entirety – it contains important
information about safety, installation, commissioning and use. Particularly important safety
information is identified with the symbol
!
in the left margin.
If you fail to follow the safety instructions in this instruction manual, there is a risk of serious
damage to property or injury to animals or people. You should keep this instruction manual in
a safe place for future use.
EP105 or unit controlled by EP105 can be used by children from the age of 8 years and by
people with physical, sensory or mental disabilities or inadequate experience and knowledge
if it takes place under supervision, or if they have been given instructions on how to use an
EP105 or a unit controlled by an EP105 and understand the dangers that may arise.
Children must not play with the installation or the controlled units. Cleaning and maintenance
must not be performed by children.
The EP105 control unit or the accessories recommended by FAAC Nordic AB must not be
modified without the express consent of FAAC Nordic AB.
Only qualified persons working in their own fields may perform installation, adjustment,
commissioning, repair and other work.
Electrical connections may only be made by qualified electricians, who accept responsibility for
the connections.
Follow the safety instructions of the equipment to be controlled by the control unit.
• Safety classification
FAAC Nordic AB has validated the safety circuits in the EP105 to performance level PL = c
and Category 2 as defined in SS-EN ISO 13849-2:2008.
The EP105 is designed with safety edge inputs and an integrated load guard for use in personal
safety applications. These features are designed to meet the requirements of Machinery
Directive 2006/42/EC.
The validation process assumed a technical service life of 10 years or 1 million operating cycles
for components in safety circuits.
FAAC Nordic is unable to guarantee this validation when the motor contactors and safety
edges exceed this technical service life. For this reason, these components should be replaced
before the end of their service life.