DXP HD 4K PLUS Series • SIS Configuration and Control
51
Command
ASCII Command
(Host to Switcher)
Response
(Switcher to Host)
Additional Description
Device Commands
Verbose Mode
Set verbose mode
EX2#
CV
}
Vrb
X2#]
Enable or disable verbose mode and
tagged responses, where additional
information is provided in response to
a query.
View verbose mode
E
CV
}
X2#]
View the verbose mode.
Reset Mode
Reset flash memory
24
E
ZFFF
}
Zpf
]
Clear the flash memory.
Reset all device settings to
factory default
24
E
ZXXX
}
Zpx
]
Reset all device settings to factory
default except unit name.
Absolute system reset
24
E
ZQQQ
}
Zpq
]
Reset all device settings, including
DHCP (off) and IP settings. The
default IP address after reset is
192.168.254.254.
Reset all device settings
and delete files
24
E
ZY
}
Zpy
]
Reset all device settings, excluding IP
settings.
Reset mutes
E
ZZ
}
Zpz
]
Unmute all muted outputs.
Power Save Mode
NOTE:
In power save modes 1 and 2 (
X2$
=
1
or
2
), the cooling fans slow to save power.
Set power save mode
EX2$
PSAV
}
Psav
X2$]
Set the power save mode to
X2$
.
NOTE:
The switcher returns to normal mode (
X2$
=
0
) when you use the front panel, issue the
E
0PSAV
}
command, connect via PCS, or cycle power.
Set power save mode 2
E
2PSAV
}
Psav2
]
NOTE:
The switcher returns to normal mode (
X2$
=
0
) only when you issue the
E
0PSAV
}
command,
connect via PCS, or cycle power.
Set power save mode 0
E
0PSAV
}
Psav0
]
Set to normal operation (default).
View power save mode
E
PSAV
}
X2$]
NOTES:
X2#
= Verbose mode
0
= clear or none (default for Telnet connections)
1
= verbose mode (default for RS-232 and USB connections)
2
= tagged responses for queries
3
= verbose mode and tagged queries
X2$
= Power save mode
0
= normal operation (default)
1
= limited functionality — Turn off all functions except IP, USB,
and RS-232 ports, and slow fan speed.
To return to mode
0
:
Press a front panel button, issue an
SIS command, or cycle power.
2
= limited functionality — Turn off all functions except IP, USB,
and RS-232 ports and slow fan speed. Front panel is
non-responsive. The unit responds only to SIS viewing
commands and
E
0PSAV
}
.
To return to mode
0
:
Enter
E
0PSAV
}
(only method).