DXP HD 4K PLUS Series • Operation
19
Adding a Tie to a Set of Ties
To add a new tie to a configuration:
1.
Press and release the
Esc
button.
2.
To select only video for the tie
, press and release the
I/O
button to toggle video on.
The Video LED lights green when video is enabled. Deselect audio by pressing the
I/O
button until the Audio LED is unlit (see figure 11).
Press the
I/O
button to toggle video on.
The Video LED lights
green
when video is selected.
Press the
I/O
button to toggle audio off.
The Audio LED is
unlit
when audio is deselected.
I/O
VIDEO
AUDIO
Figure 11.
Selecting Video Only
To select only audio for the tie
, press and release the
I/O
button to toggle audio on.
The Audio LED lights red when audio is enabled. Deselect video by pressing the
I/O
button until the Video LED is unlit.
3.
Press and release the desired input button.
•
If only video is selected
, its LED lights green to indicate that video outputs can be
tied to or untied from this input. Output button LEDs for any outputs already tied to
the selected input light green also (see figure 12).
INPUTS
1
5
2
6
3
7
4
8
OUTPUTS
1
5
2
6
3
7
4
8
Press and release an Input button.
The LED lights
green
to indicate that video
outputs can be tied to or untied from this input.
The LEDs for any outputs already tied to the selected
input light green
to indicate the existing video ties.
Figure 12.
Selecting an Input with Ties (Video)
•
If only audio is selected
, the LED for the selected input button lights red to
indicate that audio outputs (output 2 only) can be tied to or untied from this input.
4.
Press and release the button for the output to be added to the tie. The LED for the
selected output button blinks green (for video only, see figure 13) or red (for audio only)
to indicate that the selected input is being tied to this output.
In addition, the
Enter
button LED blinks green.
ENTER
PRESET
ESC
I/O
VIDEO
AUDIO
OUTPUTS
1
5
2
6
3
7
4
8
Press and release the Output button to be
added to the tie.
The LED blinks
green
to indicate that the
selected video input is being tied to this output.
The
Enter
button LED blinks
green
to
indicate the need to confirm the change.
Figure 13.
Selecting an Additional Output (Video)
5.
Press the
Enter
button to confirm the tie. All button LEDs become unlit.
