DXP HD 4K PLUS Series • SIS Configuration and Control
39
Symbol Definitions
• = Space
]
= Carriage return with line feed
}
or
|
= Carriage return with no line feed
E
or
W
= Escape key
24
= Superscripts indicate the error message displayed if the command is entered
incorrectly or with invalid parameters (see
on page 37).
X!
= Input number
0
= untie (for ties If applicable)
1-
<
maximum
number
of
inputs
>
X@
= Output number
0
= untie (for ties if applicable)
1-
<
maximum
number
of
outputs
>
X#
= Enable or disable
0
= disable
1
= enable
X$
= Name
16 alphanumeric characters (12 characters for room
names)
NOTE:
The pipe (
|
) character cannot be used in names. All other characters, including
symbols and spaces, are permitted.
X%
= Analog audio and S/PDIF
output number
1
or
2
X^
= HDCP Authorized device
0
= block HDCP encryption
1
= allow HDCP encryption (default)
X&
= Input HDCP status
0
= no source detected
1
= source is HDCP compliant
2
= source is not HDCP compliant
X*
= Output format
0
= pass-through (default)
1
= RGB (color quantization follows input)
2
= YUV 444 (color quantization follows input)
3
= YUV 422 (color quantization follows input)
X(
= Color bit depth
0
= auto (default)
1
= 8-bit
X1)
= HDCP mode
0
= auto (follow the input, default)
1
= on (always encrypt HDMI outputs)
X1!
= Output HDCP status
0
= no sink is detected
1
= sink is connected, but does not support
HDCP
2
= sink is connected, supports HDCP, but is
currently not encrypted
3
= sink is connected, supports all HDCP
versions, and is currently encrypted
X1@
= Video mute
0
= unmute
1
= video mute
2
= video and sync mute
