DXP HD 4K PLUS Series • SIS Configuration and Control
40
X1#
= Audio mute
0
= unmute
1
= HDMI audio mute
2
= Analog audio mute
3
= HDMI and analog audio mute
4
= S/PDIF mute
5
= HDMI audio and S/PDIF mute
6
= Analog audio and S/PDIF mute
7
= HDMI and analog audio, and S/PDIF mute
X1$
= Output mute
0
= unmute
1
= video mute (one or more outputs)
2
= audio mute (one or more outputs)
3
= video and audio mute (one or more outputs)
X1%
= Input attenuation
-20
to
00
in dB (
00
= default)
X1^
= Output volume
0
to
100
percent in approximately 1 dB intervals
(
100
= default)
NOTE:
If
X1^
exceeds the acceptable volume range specified in the
output volume setting (V) commands
E13
error message is returned.
X1&
= Global preset number
1-16
X1*
= Room number
1-10
X1(
= Room preset number
1-10
X2)
= Front Panel Lockout
mode
0
= unlock the front panel
1
= mode 1 (complete front panel lockout)
2
= mode 2 (tie configuration and preset
management only, default)
X2@
= Signal status
0
= no signal detected
1
= input signal detected
X2#
= Verbose mode
0
= clear or none (default for Telnet connections)
1
= verbose mode (default for RS-232 and
USB connections)
2
= tagged responses for queries
3
= verbose mode and tagged queries
X2$
= Power save mode
0
= normal operation (default)
1
= limited functionality — disable all functions
except IP, USB, and RS-232, and reduce fan
speed.
To return to mode
0
:
Press a front panel
button, issue an SIS command, cycle
power, or open PCS.
2
= limited functionality — disable all functions
except IP, USB, and RS-232 ports, and
reduce fan speed. Front panel is
non-responsive. Responds only to SIS
viewing commands and
E
0PSAV
}
.
To return to mode
0
:
Enter the
E
0PSAV
}
command or open PCS.
X2%
= Firmware version
n.nn
X2^
= Verbose firmware version
[version]-[description]-[upload date and
time]
X2&
= Power supply
In voltage