DXP HD 4K PLUS Series • SIS Configuration and Control
38
SIS Overview
Using the Command and Response Table
beginning on page 43 lists the commands that the
switcher recognizes as valid, the responses that are returned to the host, a description
of the command function or the results of executing the command, and examples of
commands in ASCII.
NOTE:
Upper- and lowercase text can be used interchangeably unless otherwise
stated.
ASCII to Hex Conversion Table
•
Space
Figure 32.
ASCII to Hexadecimal Character Conversion Table
Verbose Mode
The connection to a DXP switcher can be used to monitor for changes that occur on the
switcher, such as front panel operations and SIS commands from a TCP/IP connection
or the RS-232 serial port. To receive change notices from the switcher, you must enable
verbose mode 1 or 3 (see the
commands on page 51). In verbose mode 1
or 3, changes are reported in messages that resemble SIS command responses.
