DXP HD 4K PLUS Series • SIS Configuration and Control
48
Command
ASCII Command
(Host to Switcher)
Response
(Switcher to Host)
Additional Description
Preset Commands
Global Presets
NOTE:
n
= maximum number of outputs.
Save global preset
X1&
,
Spr
X1&]
Save the current
configuration to a global
preset.
Recall global preset
X1&
.
Rpr
X1&]
Apply a global preset
configuration.
Directly write global preset
E
+
X1&
P
X!
*
X@
%
...
X!
*
X@
%
}
Spr
X1&]
Save a specified
configuration to a global
preset in one command
entry.
NOTE:
Before using the direct write of a global preset, always clear that global preset (see
EX1&
ZG
}
,
below). In a directly written preset, the tied input for each output position (or no tied input) remains
unchanged unless overwritten or cleared. If you do not clear the preset number before directly writing
another preset to it, ties that are part of the previous version may become part of the new preset.
View global HDMI preset
EX1&
*01*1VC
}
X!
1
•X!
2
•
...
X!
16
•
Vid
]
View the inputs tied to
each output for a global
preset.
Vgp
X1&
*Out01
•
X!
1
•
...
X!
2
or
4
•
...
--
16
•
Vid
]
Verbose modes 2 and 3:
View global audio preset
EX1&
*01*2VC
}
X!
1
•
...
X!
2
or
4
•
...
--
16
•
Aud
]
View the inputs tied to
each audio-only output for
a global preset.
--
= output is not
applicable.
Vgp
X1&
*Out01
•
X!
1
•
...
X!
2
or
4
•
...
--
16
•
Aud
]
Verbose modes 2 and 3:
Set global preset name
EX1&
,
X$
NG
}
Nmg
X1&
,
X$]
Set a global preset name.
View global preset name
EX1&
NG
}
X$]
Nmg
X1&
,
X$]
View a global preset
name.
Verbose modes 2 and 3
Reset all global presets
E
ZG
}
Zpg
]
Clear all global presets.
Reset individual preset
EX1&
ZG
}
Zpg
X1&]
Clear an individual global
preset.
NOTES:
X!
= Input number
1
through <
maximum
number
of
inputs
>
X@
= Output number
1
through <
maximum
number
of
outputs
>
X$
= Name
16 alphanumeric characters ([unassigned] for presets that have not
been saved)
X1&
= Global preset number
1-16
.
X1&
can be
0
for viewing current ties only.
