DXP HD 4K PLUS Series • Operation
20
Removing a Tie from a Set of Ties
To undo an existing I/O tie:
1.
Press and release the
Esc
button to clear any previous selections.
2.
Press the
I/O
button repeatedly to select the type of tie you want to break (green for
Video
, red for
Audio
).
I/O
VIDEO
Press I/O button to
select audio or video.
Lights
green
when video is selected.
I/O
AUDIO
Lights
red
when audio is selected.
Figure 14.
Selecting Audio or Video using the I/O Button
3.
Press the input button whose tie you want to break. The input button LED and its tied
output button LEDs light red (audio) or green (video), depending on your selection in
step 2 and on the types of ties the selected input currently has.
Figure 15 shows an example of selecting an audio-only tie to break.
INPUTS
1
5
2
6
3
7
4
8
OUTPUTS
1
5
2
6
3
7
4
8
Press and release an Input button.
The LED lights to indicate whether audio or
video was selected for the input.
The LEDs for any outputs already tied to the selected input
light to indicate the existing video ties (audio in this example).
Figure 15.
Selecting an Input
4.
Press the desired output button whose LED is lit. The selected output button LED and
the
Enter
button LED start to blink, indicating a change is pending.
Press the Output button for the tie to be broken.
The LED starts to blink.
The
Enter
button LED blinks green,
indicating the need to confirm the
change.
ENTER
OUTPUTS
1
5
2
6
3
7
4
8
Figure 16.
Selecting the Output to Untie
5.
Press the
Enter
button. The selected input and output LEDs and the
Enter
button
become unlit, and the tie is broken.
