manualshive.com logo in svg

Extreme Networks ExtremeWare XOS 11.3, Manual

Get free access to the Extreme Networks ExtremeWare XOS 11.3 user manual for all your networking needs. Easily download the manual from manualshive.com to navigate the advanced features and functions of this cutting-edge product. Stay informed and make the most out of your networking experience with this comprehensive guide.

Share
Download
background image

 

ExtremeWare XOS 11.3 Concepts Guide

671

Index of Commands

C

check policy, 258
clear access-list counter, 273
clear counters, 208, 329
clear inline-power stats ports, 173
clear log counters, 208
clear log static, 613
clear session, 44, 69
clear slot, 110, 613
clear vlan dhcp-address-allocation, 319
configure access-list, 259, 272
configure account, 44
configure banner, 44
configure bgp add aggregate-address, 574
configure bgp add network, 578
configure bgp delete network, 578
configure bgp import-policy, 260, 284
configure bgp neighbor dampening, 576
configure bgp neighbor no-dampening, 576
configure bgp neighbor peer-group, 575
configure bgp neighbor route-policy, 260, 284
configure bgp peer-group dampening, 576
configure bgp peer-group no dampening, 576
configure bgp peer-group route-policy, 260, 284
configure bootprelay add, 509
configure bootprelay delete, 509
configure cli max-sessions, 60
configure core-dumps, 627
configure diffserv examination code-point, 301
configure diffserv replacement, 302
configure dns-client add, 54
configure dns-client default-domain, 54
configure dos-protect acl-expire, 321
configure dos-protect interval, 321
configure dos-protect trusted-ports, 321
configure dos-protect type l3-protect alert-
threshold, 321
configure dos-protect type l3-protect notify-
threshold, 321
configure dot1p type, 298
configure eaps add control vlan, 406
configure eaps add protect vlan, 407
configure eaps failtime, 405
configure eaps failtime expiry-action, 405
configure eaps fast-convergence, 407
configure eaps hellotime, 405
configure eaps mode, 404

configure eaps primary port, 406
configure eaps secondary port, 406
configure eaps shared-port domain, 414
configure eaps shared-port mode, 414
configure eaps shared-port segment-timeout, 415
configure edp advertisement-interval, 135
configure elrp-client one-shot, 622
configure elrp-client periodic, 622
configure esrp add master, 468
configure esrp add member, 469
configure esrp add track-environment failover,
470
configure esrp add track-iproute, 471
configure esrp add track-ping, 471
configure esrp add track-vlan, 470
configure esrp delete elrp-poll ports, 478
configure esrp delete master, 468, 620
configure esrp delete member, 469
configure esrp delete track-iproute, 471
configure esrp delete track-ping, 471
configure esrp delete track-vlan, 470
configure esrp domain-id, 460, 468
configure esrp election-policy, 465, 470
configure esrp elrp-master-poll disable, 478
configure esrp elrp-premaster-poll disable, 478
configure esrp elrp-premaster-poll enable, 477
configure esrp mode, 459
configure esrp port-mode ports, 475
configure esrp ports mode, 474
configure esrp ports no-restart, 473
configure esrp ports restart, 473
configure esrp timer premaster, 464
configure failsafe-account, 49
configure fdb agingtime, 252
configure firmware, 607
configure igmp snooping add static group, 582
configure igmp snooping add static router, 582,
588
configure igmp snooping delete static group, 582,
588
configure igmp snooping delete static router, 582,
588
configure igmp snooping filter, 582
configure inline-power budget slot, 165, 170
configure inline-power disconnect-precedence,
166, 171
configure inline-power label ports, 173
configure inline-power operator-limit ports, 168,

Summary of Contents for ExtremeWare XOS 11.3



























































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ExtremeWare XOS 11.3

Canon PowerShot SX1 IS Software Manual preview
PowerShot SX1 IS
Brand: Canon Pages: 48
Canon VB-M40 Viewer Operation Manual preview
VB-M40
Brand: Canon Pages: 2
Samsung ML-1610 - B/W Laser Printer Manual preview
ML-1610 - B/W Laser Printer
Brand: Samsung Pages: 18
Samsung ML 3471ND - B/W Laser Printer Manual preview
ML 3471ND - B/W Laser Printer
Brand: Samsung Pages: 27
Samsung MFP SCX-6345N User Manual preview
MFP SCX-6345N
Brand: Samsung Pages: 49
MACROMEDIA COLDFUSION MX 7.0.2-USING COLDFUSION MX WITH FLEX... Use Manual preview
COLDFUSION MX 7.0.2-USING COLDFUSION MX WITH FLEX...
Brand: MACROMEDIA Pages: 90
Xerox DocuPrint 115 System Manual preview
DocuPrint 115
Brand: Xerox Pages: 100
NETGEAR GS110TP - ProSafe Gigabit Smart Switch Installation Manual preview
GS110TP - ProSafe Gigabit Smart Switch
Brand: NETGEAR Pages: 2
ProfiNet ProfinetCommander User Manual preview
ProfinetCommander
Brand: ProfiNet Pages: 25
Blackberry WINDOWS LIVE MESSENGER - LEARN MORE User Manual preview
WINDOWS LIVE MESSENGER - LEARN MORE
Brand: Blackberry Pages: 18
GE eKEY User Manual preview
eKEY
Brand: GE Pages: 82
Linux LINUX ENTERPRISE DESKTOP 10 SP1 - Manual preview
LINUX ENTERPRISE DESKTOP 10 SP1 -
Brand: Linux Pages: 76
Genius HyperMedia Center Manual preview
HyperMedia Center
Brand: Genius Pages: 12
eCopy ShareScan 4.2 Installation And Setup Manual preview
ShareScan 4.2
Brand: eCopy Pages: 266
TC Works ASSIMILATOR User Manual preview
ASSIMILATOR
Brand: TC Works Pages: 20
Garmin Pilot for Android User Manual preview
Pilot for Android
Brand: Garmin Pages: 150
Red Hat CERTIFICATE SYSTEM 8 - AGENTS GUIDE Agents Manual preview
CERTIFICATE SYSTEM 8 - AGENTS GUIDE
Brand: Red Hat Pages: 146
SimpleTech SimpleDrive SP-U25/120 Quick Start Manual preview
SimpleDrive SP-U25/120
Brand: SimpleTech Pages: 8

Brands by name

Popular brands

Load more brands