manualshive.com logo in svg

Extreme Networks ExtremeWare XOS 11.3, Manual

Get free access to the Extreme Networks ExtremeWare XOS 11.3 user manual for all your networking needs. Easily download the manual from manualshive.com to navigate the advanced features and functions of this cutting-edge product. Stay informed and make the most out of your networking experience with this comprehensive guide.

Share
Download
background image

Contents

 

ExtremeWare XOS 11.3 Concepts Guide

9

FDB Contents ...................................................................................................................249
How FDB Entries Get Added...............................................................................................250
FDB Entry Types ...............................................................................................................250

FDB Configuration Examples ....................................................................................................251

Adding a Permanent Static Entry ........................................................................................251
Configuring the FDB Aging Time .........................................................................................252
Clearing FDB Entries .........................................................................................................252

Displaying FDB Entries ............................................................................................................252

MAC-Based Security................................................................................................................253

Disabling MAC Address Learning ........................................................................................253
Disabling Egress Flooding ..................................................................................................254
Displaying Learning and Flooding Settings...........................................................................256

Multicast FDB with Multiport Entry—Summit X450 Switch and BlackDiamond 8800 Chassis Only.256

Chapter 12: Policy Manager ........................................................................................................ 257

Policy Manager .......................................................................................................................257

Creating and Editing Policies....................................................................................................257

Using the Edit Command ...................................................................................................258
Using a Separate Machine .................................................................................................258
Checking Policies ..............................................................................................................258
Refreshing Policies............................................................................................................259

Applying Policies ....................................................................................................................259

Applying ACL Policies........................................................................................................259
Applying Routing Policies ..................................................................................................260

Chapter 13: Access Lists (ACLs)................................................................................................... 261

ACLs......................................................................................................................................261

ACL Policy File Syntax .......................................................................................................262
Dynamic ACLs ..................................................................................................................268
ACL Evaluation Precedence................................................................................................269
ACL Metering—BlackDiamond 8800 Family and Summit X450 Only .....................................271

Applying ACL Policy Files ........................................................................................................272

Displaying and Clearing ACL Counters .................................................................................273
Example ACL Rule Entries .................................................................................................273

Chapter 14: Routing Policies ....................................................................................................... 279

Routing Policies......................................................................................................................279

Routing Policy File Syntax..................................................................................................279
Applying Routing Policies ..................................................................................................284
Policy Examples ................................................................................................................284

Chapter 15: Quality of Service ..................................................................................................... 289

Overview of Policy-Based Quality of Service ...............................................................................289

Applications and Types of QoS .................................................................................................290

Voice Applications.............................................................................................................290
Video Applications.............................................................................................................290
Critical Database Applications ............................................................................................291
Web Browsing Applications ................................................................................................291
File Server Applications .....................................................................................................291

Configuring QoS......................................................................................................................292

Summary of Contents for ExtremeWare XOS 11.3



























































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ExtremeWare XOS 11.3

Xtore XN200 series XN-004-A1 User Manual preview
XN200 series XN-004-A1
Brand: Xtore Pages: 4
Xtore XN200 series XN-004-A1 Software Manual preview
XN200 series XN-004-A1
Brand: Xtore Pages: 7
MACROMEDIA BREEZE-MANAGING EXTERNAL BREEZE REPORTS Manual preview
BREEZE-MANAGING EXTERNAL BREEZE REPORTS
Brand: MACROMEDIA Pages: 18
Xerox LaserWriter 8.x driver User Manual preview
LaserWriter 8.x driver
Brand: Xerox Pages: 12
Savin RW-470 Clients Installation Manual preview
RW-470 Clients
Brand: Savin Pages: 71
Avaya CPSEE_TSP500 User Manual preview
CPSEE_TSP500
Brand: Avaya Pages: 216
FARONICS POWER SAVE MAC Manual preview
POWER SAVE MAC
Brand: FARONICS Pages: 34
GE Secure Perfect 6.1.1 User Manual preview
Secure Perfect 6.1.1
Brand: GE Pages: 269
Symantec Veritas CommandCentral 5.1 Getting Started Manual preview
Veritas CommandCentral 5.1
Brand: Symantec Pages: 52
Seagate FreeAgent Desk Specifications preview
FreeAgent Desk
Brand: Seagate Pages: 2
Red Hat CERTIFICATE 7.3 RELEASE NOTES Release Note preview
CERTIFICATE 7.3 RELEASE NOTES
Brand: Red Hat Pages: 24
ZyXEL Communications NetAtlas Workgroup User Manual preview
NetAtlas Workgroup
Brand: ZyXEL Communications Pages: 242
FieldServer FS-8700-47 Driver Manual preview
FS-8700-47
Brand: FieldServer Pages: 51
Darim VideoSpider User Manual preview
VideoSpider
Brand: Darim Pages: 8
MACROMEDIA 38028779 - Macromedia Dreamweaver - Mac Using Manual preview
38028779 - Macromedia Dreamweaver - Mac
Brand: MACROMEDIA Pages: 582
TerraTec CAMEO DV800 Manual preview
CAMEO DV800
Brand: TerraTec Pages: 20
KAPERSKY ADMINISTRATION KIT 6.0 Reference preview
ADMINISTRATION KIT 6.0
Brand: KAPERSKY Pages: 229
TC Electronic Intelligent Vocal Harmony Harmony4 Manual preview
Intelligent Vocal Harmony Harmony4
Brand: TC Electronic Pages: 21

Brands by name

Popular brands

Load more brands