manualshive.com logo in svg

Extreme Networks ExtremeWare XOS 11.3, Manual

Get free access to the Extreme Networks ExtremeWare XOS 11.3 user manual for all your networking needs. Easily download the manual from manualshive.com to navigate the advanced features and functions of this cutting-edge product. Stay informed and make the most out of your networking experience with this comprehensive guide.

Share
Download
background image

Contents

 

ExtremeWare XOS 11.3 Concepts Guide

17

Using the Loopback Interface .............................................................................................574
BGP Peer Groups ..............................................................................................................574
BGP Route Flap Dampening ...............................................................................................575
BGP Route Selection .........................................................................................................577
Stripping Out Private AS Numbers from Route Updates ........................................................577
Route Redistribution .........................................................................................................577
BGP Static Network...........................................................................................................578

Chapter 30: IP Multicast Routing.................................................................................................. 579

Overview ................................................................................................................................579

PIM Overview....................................................................................................................579
IGMP Overview .................................................................................................................581

Configuring IP Multicast Routing ..............................................................................................583

Configuration Examples ...........................................................................................................583

PIM-DM Configuration Example ..........................................................................................584
PIM-SM Configuration Example ..........................................................................................585

Chapter 31: IPv6 Multicast Routing .............................................................................................. 587

Overview ................................................................................................................................587

MLD Overview...................................................................................................................587

Part 3: Appendixes

Appendix A: Software Upgrade and Boot Options........................................................................... 591

Downloading a New Image .......................................................................................................591

Image Filename Prefixes ....................................................................................................591
Understanding the Image Version String ..............................................................................592
Software Signatures...........................................................................................................592
Selecting a Primary or a Secondary Image ...........................................................................593
Installing a Core Image ......................................................................................................593
Installing a Modular Software Package ................................................................................594
Rebooting the Switch ........................................................................................................596
Rebooting the Management Module—Modular Switches Only ................................................597

Understanding Hitless Upgrade—BlackDiamond 10K Switch Only ...............................................597

Performing a Hitless Upgrade .............................................................................................598
Hitless Upgrade Examples..................................................................................................600

Saving Configuration Changes ..................................................................................................601

Viewing a Configuration .....................................................................................................602
Returning to Factory Defaults .............................................................................................602

Using TFTP to Upload the Configuration....................................................................................603

Using TFTP to Download the Configuration ................................................................................603

Synchronizing MSMs—Modular Switches Only ...........................................................................604

Additional Behavior on the BlackDiamond 8800 Family of Switches Only ...............................604
Automatic Synchronization of Configuration Files .................................................................605

Accessing the Bootloader .........................................................................................................605

Upgrading the BootROM—BlackDiamond 10K Switch Only.........................................................606

Upgrading the BootROM—Summit X450 Switch Only.................................................................606

Accessing the Bootstrap CLI on the Summit X450................................................................607

Upgrading the Firmware—BlackDiamond 8800 Family of Switches Only ......................................607

Summary of Contents for ExtremeWare XOS 11.3



























































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ExtremeWare XOS 11.3

DAVIS and Vantage Pro Getting Started Manual preview
and Vantage Pro
Brand: DAVIS Pages: 16
Waves Linear-Phase MultiBand Software Audio Processor User Manual preview
Linear-Phase MultiBand Software Audio Processor
Brand: Waves Pages: 27
Califone AV Tutor MCFBV1-D Specification preview
AV Tutor MCFBV1-D
Brand: Califone Pages: 1
Juniper JUNOSE 11.2 Configuration Manual preview
JUNOSE 11.2
Brand: Juniper Pages: 772
ROUTE 66 MAPS User Manual preview
MAPS
Brand: ROUTE 66 Pages: 28
Alcatel neopost UK Manual preview
neopost UK
Brand: Alcatel Pages: 4
Omron FLEXXPECT Brochure preview
FLEXXPECT
Brand: Omron Pages: 4
VDO TIS-COMPACT III Brochure preview
TIS-COMPACT III
Brand: VDO Pages: 8
Red Hat CERTIFICATE SYSTEM 6.0 - MIGRATION GUIDE Manual preview
CERTIFICATE SYSTEM 6.0 - MIGRATION GUIDE
Brand: Red Hat Pages: 76
Polycom CMA V4.0 User Manual preview
CMA V4.0
Brand: Polycom Pages: 23
Symantec Norton Antispam Personal Firewall and Systemwork - Norton Antispam User Manual preview
Norton Antispam Personal Firewall and Systemwork - Norton Antispam
Brand: Symantec Pages: 33
Symantec NORTON 360 5.0 User Manual preview
NORTON 360 5.0
Brand: Symantec Pages: 40
Symantec NORTON GHOST User Manual preview
NORTON GHOST
Brand: Symantec Pages: 80
Symantec OLE Automation Manual preview
OLE Automation
Brand: Symantec Pages: 91
Symantec ALTIRIS INVENTORY 7.0 SP2 - FOR NETWORK DEVICES V1.0 Manual preview
ALTIRIS INVENTORY 7.0 SP2 - FOR NETWORK DEVICES V1.0
Brand: Symantec Pages: 148
M-Audio Torq Conectiv User Manual preview
Torq Conectiv
Brand: M-Audio Pages: 88
UNIBLUE REGISTRYBOOSTER Quick Start Manual preview
REGISTRYBOOSTER
Brand: UNIBLUE Pages: 3
UNIBLUE POWERSUITE Quick Start Manual preview
POWERSUITE
Brand: UNIBLUE Pages: 4

Brands by name

Popular brands

Load more brands