manualshive.com logo in svg

Extreme Networks ExtremeWare XOS 11.3, Manual

Get free access to the Extreme Networks ExtremeWare XOS 11.3 user manual for all your networking needs. Easily download the manual from manualshive.com to navigate the advanced features and functions of this cutting-edge product. Stay informed and make the most out of your networking experience with this comprehensive guide.

Share
Download
background image

 

Contents

ExtremeWare XOS 11.3 Concepts Guide

18

Appendix B: Troubleshooting ....................................................................................................... 609

Troubleshooting Checklists.......................................................................................................609

Layer 1 ............................................................................................................................609
Layer 2 ............................................................................................................................610
Layer 3 ............................................................................................................................610

LEDs......................................................................................................................................612

Using the Command Line Interface ...........................................................................................614

General Tips and Recommendations ...................................................................................614
MSM Prompt—Modular Switches Only ................................................................................616
Command Prompt .............................................................................................................616
Port Configuration .............................................................................................................617
VLANs..............................................................................................................................618
STP .................................................................................................................................618
ESRP ...............................................................................................................................619
VRRP ...............................................................................................................................620

Using Standalone ELRP to Perform Loop Tests ..........................................................................620

About Standalone ELRP.....................................................................................................621
Configuring Standalone ELRP.............................................................................................621
Displaying Standalone ELRP Information.............................................................................622

Using the Rescue Software Image—Modular Switches Only.........................................................623

Obtaining the Rescue Image from a TFTP Server ..................................................................623
Obtaining the Rescue Image from an External Compact Flash Memory Card—
BlackDiamond 8800 Family of Switches Only ......................................................................624

Debug Mode ...........................................................................................................................626

Saving Debug Information to the Memory Card...........................................................................626

Enabling the Switch to Send Debug Information...................................................................627
Copying Debug Information ................................................................................................627
Managing Files on the External Memory Card—Modular Switches Only ...................................627

TOP Command........................................................................................................................629

TFTP Server Requirements.......................................................................................................629

System Health Check—Modular Switches Only ..........................................................................629

Overview of the System Health Checker ...............................................................................629
Enabling and Disabling Backplane Diagnostic Packets on the Switch .....................................630
Configuring Backplane Diagnostic Packets on the Switch ......................................................631

System Odometer....................................................................................................................631

Monitored Components ......................................................................................................631
Recorded Statistics ...........................................................................................................631

Temperature Operating Range ..................................................................................................632

Corrupted BootROM on the BlackDiamond 8800 Family of Switches............................................633

Inserting Powered Devices in the PoE Module—BlackDiamond 8800 Family of Switches Only........633

Untagged Frames on the 10 Gbps Module—BlackDiamond 10K Switch Only................................633

Running MSM Diagnostics from the Bootloader—BlackDiamond 10K Switch Only ........................633

Contacting Extreme Networks Technical Support........................................................................634

Appendix C: CNA Agent................................................................................................................ 635

Overview ................................................................................................................................635

Redundancy—BlackDiamond 10K Switch and BlackDiamond 8800 Family of Switches Only ...636

Downloading the CNA Agent Software Module............................................................................636

Running the Tests ...................................................................................................................636

Summary of Contents for ExtremeWare XOS 11.3



























































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ExtremeWare XOS 11.3

KAPERSKY ANTI-VIRUS 5.0 - FOR SAMBA SERVERS Administrator'S Manual preview
ANTI-VIRUS 5.0 - FOR SAMBA SERVERS
Brand: KAPERSKY Pages: 84
KAPERSKY ADMINISTRATION KIT 6.0 Getting Started preview
ADMINISTRATION KIT 6.0
Brand: KAPERSKY Pages: 37
KAPERSKY ADMINISTRATION KIT 6.0 Deployment Manual preview
ADMINISTRATION KIT 6.0
Brand: KAPERSKY Pages: 109
Tascam Portastudio iPad Application User Manual preview
Portastudio iPad Application
Brand: Tascam Pages: 5
MACROMEDIA FIREWORKS 2-USING FIREWORKS Use Manual preview
FIREWORKS 2-USING FIREWORKS
Brand: MACROMEDIA Pages: 20
Red Hat ENTERPRISE VIRTUALIZATION FOR DESKTOPS Solution Manual preview
ENTERPRISE VIRTUALIZATION FOR DESKTOPS
Brand: Red Hat Pages: 14
ShoreTel ShoreWare User Manual preview
ShoreWare
Brand: ShoreTel Pages: 25
TANDBERG Movi 3.0 User Manual preview
Movi 3.0
Brand: TANDBERG Pages: 10
Red Hat CERTIFICATE 8.0 RELEASE NOTES Release Note preview
CERTIFICATE 8.0 RELEASE NOTES
Brand: Red Hat Pages: 34
Denon DP-200USB Brochure & Specs preview
DP-200USB
Brand: Denon Pages: 2
Juniper VXA2000 Series Quick Start Manual preview
VXA2000 Series
Brand: Juniper Pages: 14
GRASS VALLEY NetConfig Instruction Manual preview
NetConfig
Brand: GRASS VALLEY Pages: 44
FieldServer FS-8700-66 Manual preview
FS-8700-66
Brand: FieldServer Pages: 29
IBM MAXIMO SG24-7645-00 Implementation Manual preview
MAXIMO SG24-7645-00
Brand: IBM Pages: 152
Native Instruments Scarbee MM-Bass User Manual preview
Scarbee MM-Bass
Brand: Native Instruments Pages: 39
FARONICS ANTI-VIRUS Getting Started Manual preview
ANTI-VIRUS
Brand: FARONICS Pages: 4
ICP Interactive UNIX Using Manual preview
Interactive UNIX
Brand: ICP Pages: 6
LXE 1280 Reference Manual preview
1280
Brand: LXE Pages: 260

Brands by name

Popular brands

Load more brands