Extreme Networks ExtremeWare XOS 11.3, Manual

Page: 27 / 698

ExtremeWare XOS 11.3 Concepts Guide
27
1 ExtremeWare XOS Overview
This chapter covers the following topics:
●
Platforms and Required Software Versions on page 27
●
Summary of Features on page 27
●
Software Licensing on page 33
●
Software Factory Defaults on page 36
This chapter provides an overview of the ExtremeWare XOS version 11.3 software.
Platforms and Required Software Versions
ExtremeWare XOS is the full-featured software operating system that is designed to run on the Extreme
Networks devices.
ExtremeWare XOS supports the following platforms:
●
BlackDiamond 10800 family of switches—ExtremeWare XOS 10.1 and higher
●
BlackDiamond 8810 switch (formerly known as Aspen)—ExtremeWare XOS 11.1 and higher
●
Summit X450 switch—ExtremeWare XOS 11.2 and higher
●
BlackDiamond 8806 switch—ExtremeWare XOS 11.3.1. and higher
NOTE
See “Platform-Dependent Conventions” in the Preface for information on how to determine platform-specific
implementations or features.
Summary of Features
The features of ExtremeWare XOS include:
●
Virtual local area networks (VLANs) including support for IEEE 802.1Q and IEEE 802.1p
●
Spanning Tree Protocol (STP) (IEEE 802.1D) with multiple STP domains
●
Policy-Based Quality of Service (PB-QoS)
●
Wire-speed Internet Protocol (IP) routing
●
IP multinetting
●
DHCP/BOOTP Relay
●
Extreme Standby Router Protocol (ESRP)
●
Ethernet Automatic Protection Switching (EAPS)
●
Extreme Loop Recovery Protocol (ELRP)
●
Virtual Router Redundancy Protocol (VRRP)