Extreme Networks ExtremeWare 7.2e, Installation And User Manual

Page: 285 / 344

Configuring the Summit 400 using ExtremeWare Vista
ExtremeWare 7.2e Installation and User Guide 285
Ether Type
—Ethernet type
IP Proto —IP protocol
TOS/Code Point
—IP DiffServ code points
Dest IP
—Destination IP address
Dest IP Mask —Destination subnet mask
Dest L4 Port
—Destination UDP layer 4 port
Src IP
—Source IP address
Src IP Mask —Source IP subnet mask
Src L4 Port/ICMP
—Source UDP layer 4 port/ICMP
TCP Permit Estb —TCP permit established
Egr Port —Egress port
Ingr Port
—Ingress port
Pre —Precedence
Figure 77: Access List Configuration (1 of 3)
As Figure 77 shows, the next section of the window allows you to create, reset, modify or delete an
access mask. Use the checkboxes to specify an option.