Extreme Networks ExtremeWare 7.2e, Installation And User Manual

Page: 258 / 344

258 ExtremeWare 7.2e Installation and User Guide
Using ExtremeWare Vista on the Summit 400
•
Check for newer versions of stored pages. Every visit to the page should be selected as a cache
setting.
If you are using Netscape Navigator, configure the cache option to check for changes “Every Time”
you request a page.
If you are using Microsoft Internet Explorer, configure the Temporary Internet Files setting to check
for newer versions of stored pages by selecting “Every visit to the page.”
• On older-browsers you might need to specify that images be auto-loaded.
•
Use a high-resolution monitor to maximize the amount of information displayed in the content
frame. The recommended resolution is 1024 x 768 pixels. You can also use 800 x 600 pixels.
• Turn off one or more of the browser toolbars to maximize the viewing space of the ExtremeWare
Vista content screen.
•
If you will be using ExtremeWare Vista to send an email to the Extreme Networks Technical Support
department, configure the email settings in your browser.
• Configure the browser to use the following recommended fonts:
— Proportional font—Times New Roman
— Fixed-width font—Courier New
Accessing ExtremeWare Vista
After an IP address is assigned to the VLAN, you can access the default home page of the switch.
1 Enter the following command in your browser:
http://<ipaddress>
The home page for the Summit 400 opens as shown in Figure 51.