Extreme Networks ExtremeWare 7.2e, Installation And User Manual

Page: 270 / 344

270 ExtremeWare 7.2e Installation and User Guide
Using ExtremeWare Vista on the Summit 400
Figure 62: OSPF Authentication
Ports
Port configuration provides a convenient way to see all the pertinent information about a port in one
place.
Figure 63 shows the following fields in the port configuration window:
Ports —The port number, 1 to 48
State —The port state, either enabled or disabled
Link —The link status, either active or ready
Autonegotiation —Indicates whether to autonegotiate the port speed and the duplex mode.
Autonegotiation is either enabled or disabled.
Configuration Speed —The setting for port speed, either autonegotiated (auto), 10, 100, or 1000
Actual Speed —The speed of the link, either 10, 100, or 1000
Configuration Duplex —The duplex mode, either autonegotiation (auto), half, or full
Actual Duplex —The duplex setting, either half or full
Primary Media —The primary wiring media, either unshielded twisted-pair (UTP) or fiber (SX, LX, or
ZX)
Redundant Media —The backup wiring media, always unshielded twisted-pair (UTP)