Extreme Networks ExtremeWare 7.2e, Installation And User Manual

Page: 288 / 344

288 ExtremeWare 7.2e Installation and User Guide
Using ExtremeWare Vista on the Summit 400
RIP
—Contains global RIP statistics and router interface statistics
Switch —Contains the hardware profile for the switch
Event Log
The System Even Log tracks all configuration and fault information pertaining to the device. Each entry
in the log contains the following information:
• Timestamp —The timestamp records the month and day of the event, along with the time (hours,
minutes, and seconds) in the form HH:MM:SS. If the event was caused by a user, the user name is
also provided.
• Fault level
—Describes the levels of importance that the system can assign to a fault. A fault level
can either be classified as critical, warning, informational, or debug.
By default, log entries that are assigned a critical or warning level remain in the log after a switch
reboot. Issuing a clear log command does not remove these static entries.
• Subsystem —The subsystem refers to the specific functional area to which the error refers.
For additional information on system logging, see “Event Management System/Logging” on page 125.
Figure 80: Event Entries
FDB
This window allows you to review the contents of the FDB table. It also gives summary information
about the contents of the view and allows you tailor the view by various parameters.
The view of the FDB, as shown in Figure 81, consists of the following entries: