Extreme Networks ExtremeWare 7.2e, Installation And User Manual

Page: 76 / 344

76 ExtremeWare 7.2e Installation and User Guide
Accessing the Switch
NOTE
Passwords are case-sensitive; user names are not case-sensitive.
To add a password to the default admin account, follow these steps:
1 Log in to the switch using the name admin.
2
At the password prompt, press [Return].
3 Add a default admin password by entering the following command:
configure account admin
4 Enter the new password at the prompt.
5 Re-enter the new password at the prompt.
To add a password to the default user account, follow these steps:
1 Log in to the switch using the name admin.
2 At the password prompt, press [Return], or enter the password that you have configured for the
admin account.
3 Add a default user password by entering the following command:
configure account user
4 Enter the new password at the prompt.
5 Re-enter the new password at the prompt.
NOTE
If you forget your password while logged out of the command line interface, contact your local technical
support representative, who will advise on your next course of action.
Creating a Management Account
The switch can have a total of 16 management accounts. You can use the default names (admin and
user), or you can create new names and passwords for the accounts. Passwords can have a minimum of
0 characters and can have a maximum of 30 characters.
To create a new account, follow these steps:
1
Log in to the switch as admin.
2 At the password prompt, press [Return], or enter the password that you have configured for the
admin account.
3 Add a new user by using the following command:
create account [admin | pppuser | user] <username>
4 Enter the password at the prompt.
5
Re-enter the password at the prompt.