manualshive.com logo in svg

Extreme Networks ExtremeCloud Appliance E1120, User Manual

The Extreme Networks ExtremeCloud Appliance E1120 User Manual is a comprehensive guide to help you make the most of your networking appliance. Available for free download at manualshive.com, this manual provides detailed instructions, troubleshooting tips, and configuration guidance, ensuring a seamless user experience with this high-performance product.

Share
Download
background image

RTLS Settings

A Real-Time Location System (RTLS) profile must be configured and enabled within ExtremeCloud
Appliance before ExtremeCloud Appliance will communicate with the location-based server and before
the APs will perform location-based functionality. ExtremeCloud Appliance supports the following
location-based solutions:

•

AeroScout

•

Ekahau

•

Centrak.

•

Sonitor

Configure the AP to integrate with a Real-Time Location System (RTLS).

1 Click the plus sign to create a new profile ( ).
2 Configure the following parameters:

Table 35: RTLS Parameters

Field

Description

Name

Provide a name for the RTLS profile.

Application

Select a supported RTLS application. Valid values are:

•

AeroScout

•

Ekahau

•

Centrak. Supported on AP39xx only.

•

Sonitor

Server IP Address

The IP address of the RTLS application server.

Server Port

Server port of the RTLS application server.

Multicast MAC

Multicast MAC address for the RTLS application server.

Note: Centrak and Ekahau configuration offer a default port number and multicast address. You can modify
the default values if necessary.

3 Click 

Save

.

Consider the following information related to Real-Time Location System (RTLS):

•

Ensure that your location-based service tags are configured to transmit on all non-overlapping
channels 1, 6 and 11 (and on channels above 11 where allowed). For information about proper
deployment of the location-based solution, refer to the third-party documentation (AeroScout/
Ekahau/Centrak).

•

Within an Availability Pair, tag report transmission pauses on fail-over APs until the APs are
configured and notified by the location-based server. With an availability pair, it is good practice to
configure each ExtremeCloud Appliance with the same location-based service.

•

An RTLS profile cannot be deleted when it is part of an active configuration profile.

Related Links

Adding or Editing a Configuration Profile

 on page 68

Configure

ExtremeCloud Appliance User Guide for version 4.36.03

86

Summary of Contents for ExtremeCloud Appliance E1120




























































































































































































































Reviews:

No comments

Related manuals for ExtremeCloud Appliance E1120

Ratoc Systems SCSI PC Card REX-9530V Product Manual preview
SCSI PC Card REX-9530V
Brand: Ratoc Systems Pages: 30
Edge-Core SDW100 Quick Start Manual preview
SDW100
Brand: Edge-Core Pages: 7
B&B Electronics Parallel & Serial Port Checker PPC User Manual preview
Parallel & Serial Port Checker PPC
Brand: B&B Electronics Pages: 4
AXIOMTEK eBOX532-100-FL Series Quick Installation Manual preview
eBOX532-100-FL Series
Brand: AXIOMTEK Pages: 2
ZyXEL Communications ZyAIR G-3000H User Manual preview
ZyAIR G-3000H
Brand: ZyXEL Communications Pages: 299
ICP DAS USA USB-87P1 User Manual preview
USB-87P1
Brand: ICP DAS USA Pages: 62
RANA Systems Elite Controller User Manual preview
Elite Controller
Brand: RANA Systems Pages: 328
Moxa Technologies TAP-125 Series User Manual preview
TAP-125 Series
Brand: Moxa Technologies Pages: 51
Promise Technology FastTrak TX4000 User Manual preview
FastTrak TX4000
Brand: Promise Technology Pages: 76
Ubiquiti PowerBeam PBE-5AC-400-ISO Quick Start Manual preview
PowerBeam PBE-5AC-400-ISO
Brand: Ubiquiti Pages: 23
Xyclop XC-4CH-NVR-1TB User Manual preview
XC-4CH-NVR-1TB
Brand: Xyclop Pages: 144
Silvertel Ag102 User Manual preview
Ag102
Brand: Silvertel Pages: 9
ekwb 3831109826140 User Manual preview
3831109826140
Brand: ekwb Pages: 11
Raven RFMOW V2 User Manual preview
RFMOW V2
Brand: Raven Pages: 33
iesy Open Standard Module RPX30 EVA-MI V1 Quick Start Manual preview
Open Standard Module RPX30 EVA-MI V1
Brand: iesy Pages: 9
V-Count Ultima Go Quick Installation Manual preview
Ultima Go
Brand: V-Count Pages: 2
Digi DataFire GO! PRO Manual preview
DataFire GO! PRO
Brand: Digi Pages: 20
Kontron AdvancedTCA AT8901M User Manual preview
AdvancedTCA AT8901M
Brand: Kontron Pages: 76

Brands by name

Popular brands

Load more brands