manualshive.com logo in svg

Extreme Networks ExtremeCloud Appliance E1120, User Manual

The Extreme Networks ExtremeCloud Appliance E1120 User Manual is a comprehensive guide to help you make the most of your networking appliance. Available for free download at manualshive.com, this manual provides detailed instructions, troubleshooting tips, and configuration guidance, ensuring a seamless user experience with this high-performance product.

Share
Download
background image

Capture packets from an individual AP or from a site. To capture packets from an individual AP, go to

Monitor

 > 

Devices

 > 

Access Points

. Select an access point, then select 

Troubleshooting

 > 

Packet

Capture

.

To capture packets associated with a site, go to 

Monitor

 > 

Sites

. Select a site, then select

Troubleshooting

 > 

Packet Capture

.

Note
Use at least one IP address or MAC address filter when capturing packets from a site.

The packets are logged in a PCAP file. The PCAP file is temporarily stored on the ExtremeCloud
Appliance that is associated with the AP or site. To view the PCAP file, export the file to a host running
Wireshark.

Note
Live Packet Capture is available on AP39xx and AP5xx (Centralized Site) in addition to the
saved file option. After starting Packet Capture, start Wireshark and add the remote interface
using the ExtremeCloud Appliance management IP address. See the Wireshark
documentation for details.

ExtremeCloud Appliance supports up to 10 simultaneous instances of packet capture. The maximum
PCAP file size is 1GB, stored locally on hardware appliances E1120, E2120, and E3120. The virtual
appliance VE6120 supports a 200MB PCAP file. Files can also be stored on a remote SCP server.

Packets can be captured from APs associated with either ExtremeCloud Appliance in an Availability
Pair. Packet capture will continue after failover displaying packet results in one file.

Continuous packet capture is supported on AP39xx and AP5xx (Centralized Site). If an AP must restart
after a capture has started, the capture will continue after the AP restart. If the appliance must restart,
the capture parameters are not preserved.

With AP39xx and AP5xx (Centralized Site), once packet capture has started, you can change the
capture parameters and refresh the capture, continuing to capture without interruption. This feature
allows you to modify parameters as you monitor the capture process. There is one PCAP file for each
packet capture instance.

Supported features depend on the AP model:

•

ExtremeWireless AP39xx and AP5xx (Centralized Site) models:

•

Up to 4 IP filters can be applied

•

Up to 2 MAC filters can be applied

•

Capture wired and wireless packets simultaneously or independently

•

Capture packet refresh is supported

•

Live Packet Capture is supported.

•

ExtremeWireless WiNG and AP5xx (Distributed Site) models:

•

1 IP filter can be applied

•

1 MAC filter can be applied

•

Capture wired and wireless packets independently

•

Packet capture refresh is 

not

 supported

•

Live Packet Capture is 

not

 supported.

Monitor

ExtremeCloud Appliance User Guide for version 4.36.03

46

Summary of Contents for ExtremeCloud Appliance E1120




























































































































































































































Reviews:

No comments

Related manuals for ExtremeCloud Appliance E1120

H3C H3C S7500E-X Command Reference Manual preview
H3C S7500E-X
Brand: H3C Pages: 16
H3C SR6600 SPE-FWM Configuration Manual preview
SR6600 SPE-FWM
Brand: H3C Pages: 24
PaloAlto Networks PA-5400 Series Quick Start Manual preview
PA-5400 Series
Brand: PaloAlto Networks Pages: 2
TC-Helicon PERFORM-VK Quick Start Manual preview
PERFORM-VK
Brand: TC-Helicon Pages: 2
Konig CMP-HOMEPL1000 Manual preview
CMP-HOMEPL1000
Brand: Konig Pages: 73
Ubiquiti PowerBeam AC Gen2 Quick Start Manual preview
PowerBeam AC Gen2
Brand: Ubiquiti Pages: 22
Grizzly PSJ-M3 GEN2 User Manual preview
PSJ-M3 GEN2
Brand: Grizzly Pages: 9
Endace DAG 7.1S User Manual preview
DAG 7.1S
Brand: Endace Pages: 51
Analog Devices EZ-Extender Analog 120-Pin Probing Board Manual preview
EZ-Extender Analog 120-Pin Probing Board
Brand: Analog Devices Pages: 29
Orolia Seven Solutions WR-ZEN Series User Manual preview
Seven Solutions WR-ZEN Series
Brand: Orolia Pages: 167
IBASE Technology FWA8207 Series User Manual preview
FWA8207 Series
Brand: IBASE Technology Pages: 39
Korenix JetNet 3508-LVDC User Manual preview
JetNet 3508-LVDC
Brand: Korenix Pages: 16
A4Tech RH-10 User Manual preview
RH-10
Brand: A4Tech Pages: 8
Belden HIRESCHMANN IT MAMMUTHUS MTM8003-FAN User Manual preview
HIRESCHMANN IT MAMMUTHUS MTM8003-FAN
Brand: Belden Pages: 84
OWC Mercury FireWire 400 Owner'S Manual preview
Mercury FireWire 400
Brand: OWC Pages: 2
Xyclop XC-4CH-NVR-1TB User Manual preview
XC-4CH-NVR-1TB
Brand: Xyclop Pages: 144
Silvertel Ag102 User Manual preview
Ag102
Brand: Silvertel Pages: 9
Arctic Accelero TWIN TURBO II Installation Manual preview
Accelero TWIN TURBO II
Brand: Arctic Pages: 2

Brands by name

Popular brands

Load more brands