manualshive.com logo in svg

Extreme Networks ExtremeCloud Appliance E1120, User Manual

The Extreme Networks ExtremeCloud Appliance E1120 User Manual is a comprehensive guide to help you make the most of your networking appliance. Available for free download at manualshive.com, this manual provides detailed instructions, troubleshooting tips, and configuration guidance, ensuring a seamless user experience with this high-performance product.

Share
Download
background image

View Station Logs

If configured to do so, ExtremeCloud Appliance logs all station events. You can view a record of the
station event from the Tools workbench or from the Clients workbench.

Note

Send Station Events

 before viewing station logs.

Station log files include the following information:

•

Date and timestamp

•

Event Type

•

MAC Address

•

IP Address and IPv6 Address (if appropriate)

•

SSID

•

Details

To view station log files:

1 Go to 

Tools

 > 

Logs

 > 

Station Events

. Or,

Go to 

Clients

 and select a client from the list. Then, select the Station Events tab.

2 (Optional) Search for a specific event.
3 Set a filter or use the default filter.
4 Press 

Enter

 to execute a search.

The station log list is updated.

5 (Optional) Select   to export the data and manage which columns display.

Note
ExtremeCloud Appliance provides station event history for active stations. You can also
search for inactive stations using a MAC address or user name.

Related Links

System Logging Configuration

 on page 203

Understanding Date and Time

 on page 20

Setting a Logging Filter

 on page 184

View Audit Logs

ExtremeCloud Appliance logs all configuration changes made by administrators and system messages
related to end-system activity. You can view a record of the changes and messages in the user interface.

Audit log files include the following information:

•

Date and timestamp

•

User ID of the administrator that made the change

•

The type of change that was made

To view audit log files:

Tools

ExtremeCloud Appliance User Guide for version 4.36.03

183

Summary of Contents for ExtremeCloud Appliance E1120




























































































































































































































Reviews:

No comments

Related manuals for ExtremeCloud Appliance E1120

Campbell NL115 Instruction Manual preview
NL115
Brand: Campbell Pages: 42
Palo Alto Network M-200 Reference Manual preview
M-200
Brand: Palo Alto Network Pages: 56
SeaLevel 7406e User Manual preview
7406e
Brand: SeaLevel Pages: 17
Dentsply Sirona inLab Speedcure 9494800 Instruction Manual preview
inLab Speedcure 9494800
Brand: Dentsply Sirona Pages: 91
3Com NJ220 - IntelliJack Switch User Manual preview
NJ220 - IntelliJack Switch
Brand: 3Com Pages: 82
B&B Electronics Conel UR5i v2 Libratum User Manual preview
Conel UR5i v2 Libratum
Brand: B&B Electronics Pages: 32
Sangamo CHOICE PR1 User Instructions preview
CHOICE PR1
Brand: Sangamo Pages: 2
addlink SPIDER N4 Installation Manual preview
SPIDER N4
Brand: addlink Pages: 9
SIIG 1394 Dual-Port CardBus Quick Installation Manual preview
1394 Dual-Port CardBus
Brand: SIIG Pages: 8
3Com 3C13640 Installation Manual preview
3C13640
Brand: 3Com Pages: 32
Pakedge Device & Software RK-1 Quick Start Manual preview
RK-1
Brand: Pakedge Device & Software Pages: 14
TP-Link Archer MR600 User Manual preview
Archer MR600
Brand: TP-Link Pages: 113
VIA Technologies Mobile360 M810 Quick Start Manual preview
Mobile360 M810
Brand: VIA Technologies Pages: 25
3Com Fast EtherLink XL PCI 10/100BASE-TXNetwork Interface... Quick Manual preview
Fast EtherLink XL PCI 10/100BASE-TXNetwork Interface...
Brand: 3Com Pages: 12
ZALMAN CNPS20X User Manual preview
CNPS20X
Brand: ZALMAN Pages: 20
Xilinx ML506 Quick Start Manual preview
ML506
Brand: Xilinx Pages: 29
Alesis QuadraVerb 2 Setting Up preview
QuadraVerb 2
Brand: Alesis Pages: 11
CyberPower CyberPower RMCARD201 Quick Install Manual preview
CyberPower RMCARD201
Brand: CyberPower Pages: 8

Brands by name

Popular brands

Load more brands