manualshive.com logo in svg

Extreme Networks ExtremeCloud Appliance E1120, User Manual

The Extreme Networks ExtremeCloud Appliance E1120 User Manual is a comprehensive guide to help you make the most of your networking appliance. Available for free download at manualshive.com, this manual provides detailed instructions, troubleshooting tips, and configuration guidance, ensuring a seamless user experience with this high-performance product.

Share
Download
background image

The ExtremeCloud Appliance can be in the following licensing modes:

•

Unlicensed

 — (DEMO) When the appliance is not licensed, it operates in demo mode. In demo

mode, you can operate as many devices as you want, subject to the maximum limit of the platform
type. In demo mode, you can use only the b/g radio, with channels 6 and 11. 11n support and Mobility
are disabled in demo mode.

•

Licensed with a temporary activation key

 — (Evaluation) A temporary activation key comes with a

regulatory domain. With the temporary activation key, you can select a country from the domain
and operate the APs on any channel permitted by the country. A temporary activation key allows
you to use all software features. You can operate as many devices as you want, subject to the
maximum limit of the platform type.

A temporary activation key is valid for 90 days. Once the 90-day period is up, the temporary key
expires. You must get a permanent activation key and install it on the appliance. ExtremeCloud
Appliance will warn you to obtain a permanent license seven days before the expiration date. If you
do not install a permanent activation key, the appliance generates event logs every 15 minutes,
indicating that an appropriate license is required for the current software version. In addition, you
will not be able to edit the Network Service parameters.

•

Licensed with permanent activation key

 — (Permanent) A permanent activation key is valid for an

infinite period. Use an activation key with a capacity key to license the devices.

Note
Whenever the licensed region changes on the appliance, all APs are changed to Auto Channel
Select to prevent possible infractions to local RF regulatory requirements. If this occurs, all
manually configured radio channel settings will be lost. Installing the new license key 

before

upgrading prevents the appliance from changing the licensed region, and in addition,
manually configured channel settings are maintained.

If the appliance detects a license violation, such as capacity adoption, a grace period counter starts
from the moment the first violation occurred. The appliance generates event logs for every violation. To
leave the grace period, clear all outstanding license violations.

The appliance can be in an unlicensed state for an infinite period. However, if you install a temporary
activation key, the unlicensed state is terminated. After the validity of a temporary activation key
expires, the controller generates event logs every 15 minutes, indicating that an appropriate license is
required for the current software version. In addition, you will not be able to edit the Network Service
parameters.

Related Links

Licensed Devices

 on page 211

Obtaining a License Key

 on page 212

Licensed Devices

ExtremeCloud Appliance supports the following access point models:

The following ExtremeMobility

™

 AP5xx series APs are supported in both a Centralized and Distributed

site:

•

AP505i

•

AP510i/e

Administration

ExtremeCloud Appliance User Guide for version 4.36.03

211

Summary of Contents for ExtremeCloud Appliance E1120




























































































































































































































Reviews:

No comments

Related manuals for ExtremeCloud Appliance E1120

Octavo OSD3358-SM-RED Getting Started Manual preview
OSD3358-SM-RED
Brand: Octavo Pages: 28
Obihai OBi110 Quick Start Manual preview
OBi110
Brand: Obihai Pages: 2
Vanguard 342 Quick Reference Manual preview
342
Brand: Vanguard Pages: 4
Xilica Audio Design neutrino series Quick Start Manual preview
neutrino series
Brand: Xilica Audio Design Pages: 26
Pima ZEL508 Installation Instructions preview
ZEL508
Brand: Pima Pages: 4
Tripp Lite N125-010-GY Specification Sheet preview
N125-010-GY
Brand: Tripp Lite Pages: 2
Intel SRCSASBB8I - RAID Controller Hardware User'S Manual preview
SRCSASBB8I - RAID Controller
Brand: Intel Pages: 36
NA DigiNet 416 User Manual preview
DigiNet 416
Brand: NA Pages: 22
Gbord EN-101 User Manual preview
EN-101
Brand: Gbord Pages: 8
ETL TeleCLIENT TC7730 Series User Manual preview
TeleCLIENT TC7730 Series
Brand: ETL Pages: 83
Multitech ISI608PC Owner'S Manual preview
ISI608PC
Brand: Multitech Pages: 81
ZALMAN CNPS7000C Series User Manual preview
CNPS7000C Series
Brand: ZALMAN Pages: 8
Eurotech Zypad WL15 Series Quick Start preview
Zypad WL15 Series
Brand: Eurotech Pages: 2
NAMCO SOUL CALIBUR II Manual preview
SOUL CALIBUR II
Brand: NAMCO Pages: 26
ebm-papst R3G560-AH02-03 Operating Instructions Manual preview
R3G560-AH02-03
Brand: ebm-papst Pages: 13
Dahua NVR41-4KS2 Series User Manual preview
NVR41-4KS2 Series
Brand: Dahua Pages: 452
Alcatel-Lucent 1353 Brochure preview
1353
Brand: Alcatel-Lucent Pages: 12
Alfa Network AC1200R Setup Manual preview
AC1200R
Brand: Alfa Network Pages: 11

Brands by name

Popular brands

Load more brands