manualshive.com logo in svg

Extreme Networks ExtremeCloud Appliance E1120, User Manual

The Extreme Networks ExtremeCloud Appliance E1120 User Manual is a comprehensive guide to help you make the most of your networking appliance. Available for free download at manualshive.com, this manual provides detailed instructions, troubleshooting tips, and configuration guidance, ensuring a seamless user experience with this high-performance product.

Share
Download
background image

Table 24: Advanced Configuration Profile Settings (continued)

Field

Description

Session Persistence

Note: Supported on APs in a Centralized site and on AP5xx in a
Distributed site.

Determines if session persistence is enabled. A persistent session
directs a client's requests to the same backend server for the duration
of a session or the time it takes to complete a task or transaction.
Enable this option to improve request response times. For more
information, see 

Session Persistence

 on page 75.

Mgmt VLAN ID

Separating management traffic from user data traffic is a
recommended practice. The Management VLAN ID is 1 by default.
AP will accept wireless client even without active connection to
ExtremeCloud Appliance on WLANs where ExtremeCloud Appliance is
not required.

Tagged

Check this option to tag the VLAN. Tagged VLAN packets include
header information that identifies which VLAN the packet is coming
from.
You can configure Tagged VLANs for all APs in a device group from
the device group Advanced Settings dialog. And you can override the
device group setting for one or more individual APs from the AP

Advance Settings

 > 

Override

 dialog.

MTU

Maximum Transmission Unit in bytes. Determines the maximum size of
each packet in transmission.

Scan Mode

Note: Supported on AP5xx models only.

Determines which channels are scanned. Valid values are:

•

Default Scan. — Scans all supported channels. Optimized to scan
widest possible channel.

•

Channel Lock — Scans on single channel.

•

Custom Scan — Scan is based on a selected custom list. Define a
custom channel list including channel width.

•

Radio 1 channels are 2.4G (AP510i/e includes 5G channels).

•

Radio 2 channels are 5G.

Channels

Select channels for a custom channel list used for 

Custom Scan

 Scan

Mode.

Configure

ExtremeCloud Appliance User Guide for version 4.36.03

74

Summary of Contents for ExtremeCloud Appliance E1120




























































































































































































































Reviews:

No comments

Related manuals for ExtremeCloud Appliance E1120

Cambium Networks PTP 550 Series Quick Start Manual preview
PTP 550 Series
Brand: Cambium Networks Pages: 68
Cambium Networks PTP 820S Installation Manual preview
PTP 820S
Brand: Cambium Networks Pages: 110
JCG Q5 Quick Installation Manual preview
Q5
Brand: JCG Pages: 3
Belkin F5D9001 Series Manual preview
F5D9001 Series
Brand: Belkin Pages: 72
Helmholz REX 200 Quick Start Manual preview
REX 200
Brand: Helmholz Pages: 28
National Instruments FieldPoint cFP-RTD-122 Operating Instructions Manual preview
FieldPoint cFP-RTD-122
Brand: National Instruments Pages: 15
Renesas H8/3864 Series User Manual preview
H8/3864 Series
Brand: Renesas Pages: 20
3Ware 9550SX Series Installation Manual preview
9550SX Series
Brand: 3Ware Pages: 4
Cypress Semiconductor CY7C1329H Specification Sheet preview
CY7C1329H
Brand: Cypress Semiconductor Pages: 16
Enterasys Enterasys Matrix 2G4082-25 Hardware Installation Manual preview
Enterasys Matrix 2G4082-25
Brand: Enterasys Pages: 58
StarTech.com ST1000SMPEX Instruction Manual preview
ST1000SMPEX
Brand: StarTech.com Pages: 9
G&D DL-DVI-Vision-IP Series Installation And Operation Manual preview
DL-DVI-Vision-IP Series
Brand: G&D Pages: 228
Cypress Semiconductor CY62136EV30 MoBL Specification Sheet preview
CY62136EV30 MoBL
Brand: Cypress Semiconductor Pages: 12
Ubiquiti UniFi WiFi BaseStation XG Quick Start Manual preview
UniFi WiFi BaseStation XG
Brand: Ubiquiti Pages: 19
CG Emotron OSTO 100 Instruction Manual preview
Emotron OSTO 100
Brand: CG Pages: 112
Supermicro X12SPO-NTF/-F User Manual preview
X12SPO-NTF/-F
Brand: Supermicro Pages: 131
sound4 STREAM X Maintenance And Operation Instruction Manual preview
STREAM X
Brand: sound4 Pages: 66
Calix GS2020E GigaSPIRE BLAST Quick Start Manual preview
GS2020E GigaSPIRE BLAST
Brand: Calix Pages: 15

Brands by name

Popular brands

Load more brands