Extreme Networks ExtremeCloud Appliance E1120 User Manual Download Page 167

Page: 167 / 219

5 To modify an entry:

1 Select an entry from the Entry list.
2 Click the drop-down arrow and select a new value.

Cloning Groups

To easily create new groups, use the cloning feature, then modify the group entries and settings as
necessary.

1 Go to

Onboard

Groups

2 Select a group from the list.
3 Click

Clone

4 Provide a name for the new group.

ExtremeCloud Appliance prompts you to open the new group.

5 Add, remove, or edit group entries and settings as necessary.

Summary of Contents for ExtremeCloud Appliance E1120




























































































































































































































Search results

Summary of Contents for ExtremeCloud Appliance E1120

Reviews:

Related manuals for ExtremeCloud Appliance E1120

Brands by name

Popular brands

Extreme Networks ExtremeCloud Appliance E1120, User Manual

Search results

Summary of Contents for ExtremeCloud Appliance E1120

Reviews:

Related manuals for ExtremeCloud Appliance E1120

Brands by name

Popular brands