manualshive.com logo in svg

Extreme Networks ExtremeCloud Appliance E1120, User Manual

The Extreme Networks ExtremeCloud Appliance E1120 User Manual is a comprehensive guide to help you make the most of your networking appliance. Available for free download at manualshive.com, this manual provides detailed instructions, troubleshooting tips, and configuration guidance, ensuring a seamless user experience with this high-performance product.

Share
Download
background image

Message String Settings

From this dialog, select the message Locale and edit the Description text for the registration verification
message displayed during the user verification process.

Managing Access Control Groups

An access control group is used to organize mobile clients by various group types, including device type
or end system characteristics such as IP address, hostname, or LDAP host group. Configure groups to
be used with access control rules. ExtremeCloud Appliance provides a set of default system groups with
your installation to simplify the group set up process.

To manage the list of groups:

1 Go to 

Onboard

 > 

Groups

.

A list of configured groups displays. From here, you can search for a group, edit group settings,
delete a group, or add a new group.

2 To edit or delete a group, select a group row.

The group settings display.

•

To edit a group, modify the group settings and click 

Save

.

•

To delete a group, click 

Delete

.

3 To add a new group, from the Access Control Groups page, click 

Add

 and configure the group

settings.

Related Links

Access Control Group Settings

 on page 165

Default Groups Provided with Your Installation

 on page 167

Access Control Rules

 on page 168

Access Control Group Settings

Configure the following access control group settings and click 

Save

. The entry parameters depend on

the Group Type.

Table 72: Access Control Group Settings

Field

Description

Name

Group name.

Description

Description of the group.

Onboard

ExtremeCloud Appliance User Guide for version 4.36.03

165

Summary of Contents for ExtremeCloud Appliance E1120




























































































































































































































Reviews:

No comments

Related manuals for ExtremeCloud Appliance E1120

i-MO 540 Series Product Installation Manual preview
540 Series
Brand: i-MO Pages: 58
Idis DR-8416 Operation Manual preview
DR-8416
Brand: Idis Pages: 123
Idis DR-6232H Installation Manual preview
DR-6232H
Brand: Idis Pages: 29
Idis DR-4516P Installation Manual preview
DR-4516P
Brand: Idis Pages: 28
Idis DirectIP DR-1304P Operation Manual preview
DirectIP DR-1304P
Brand: Idis Pages: 82
iDirect Evolution X1 Installation Manual preview
Evolution X1
Brand: iDirect Pages: 130
ebm-papst 4112 N/2HU Operating Manual preview
4112 N/2HU
Brand: ebm-papst Pages: 6
ebm-papst 4314 N/2HHPU Operating Manual preview
4314 N/2HHPU
Brand: ebm-papst Pages: 6
ebm-papst 8312 L Operating Manual preview
8312 L
Brand: ebm-papst Pages: 5
Wintech TDS510USB Plus Installation Manual preview
TDS510USB Plus
Brand: Wintech Pages: 21
IDT USB-BRIDGEV2-EVAL Evaluation Board Manual preview
USB-BRIDGEV2-EVAL
Brand: IDT Pages: 11
SyChip WLAN6065SD User Manual preview
WLAN6065SD
Brand: SyChip Pages: 24
Magma ExpressBox2 EB2 User Manual preview
ExpressBox2 EB2
Brand: Magma Pages: 74
ZyXEL Communications P-335U Specifications preview
P-335U
Brand: ZyXEL Communications Pages: 2
Omron F3SP-U3P-TGR User Manual preview
F3SP-U3P-TGR
Brand: Omron Pages: 29
Aaeon GENE-EHL7 User Manual preview
GENE-EHL7
Brand: Aaeon Pages: 119
Gigamon GigaVUE H TA100-CXP Hardware Installation Manual preview
GigaVUE H TA100-CXP
Brand: Gigamon Pages: 115
Calix GigaSpire BLAST u4hm Installation Manual preview
GigaSpire BLAST u4hm
Brand: Calix Pages: 45

Brands by name

Popular brands

Load more brands