manualshive.com logo in svg

Extreme Networks ExtremeCloud Appliance E1120, User Manual

The Extreme Networks ExtremeCloud Appliance E1120 User Manual is a comprehensive guide to help you make the most of your networking appliance. Available for free download at manualshive.com, this manual provides detailed instructions, troubleshooting tips, and configuration guidance, ensuring a seamless user experience with this high-performance product.

Share
Download
background image

Table 60: RADIUS Server Advanced Settings

Field

Description

Username Format

Determines if the domain name will be included in the username when
proxying a request to the backend RADIUS server. Valid values are:

•

Strip Domain Name (default) - Select this option unless the
backend RADIUS server requires the domain name to be included.

•

Keep Domain Name - Using this option with a Microsoft IAS or
NPS server, may cause the server to timeout. Therefore, use an
advanced AAA configuration. With a AAA configuration, only
requests for known domains are sent to the backend RADIUS
server. Unknown domains are processed locally and rejected.

Require Message-Authenticator

Protect against spoofed Access-Request messages and RADIUS
message tampering with this attribute. The Require Message-
Authenticator provides additional security when using PAP and CHAP
security protocols for authentication. EAP uses the Message
Authenticator attribute by default.

Health - Use Server Status Request

Use Server-Status RADIUS packets, as defined by RFC 5997, to
determine if the backend RADIUS server is running.

Health - Use Access Request

Use an access request message to determine if the RADIUS server is
running. The request uses a username and password. This method
looks for any response from the server. The username and password
do not need to be valid. A negative response will work. However, the
username/password fields are provided to prevent rejects from being
logged in the backend RADIUS server.

Check Interval

Determines the wait time between checks to see if the RADIUS server
is running.

Note: This is only applicable if the Server-Status request or Access
request methods are used.

Number of Answers to Alive

Determines the number of times the RADIUS server must respond
before it is marked as alive.

Note: This is only applicable if the Server-Status request or Access
request methods are used.

Revive Interval

Determines the wait time before allowing requests to go to a backend
RADIUS server, after it stops responding.

Note: Use this option only when there is no other way to detect the
health of the backend RADIUS server.
If Server-Status requests option and Access request option are not
supported by the RADIUS server, then use this option.

Related Links

Managing RADIUS Servers

 on page 146

RADIUS Settings

 on page 147

Onboard

ExtremeCloud Appliance User Guide for version 4.36.03

148

Summary of Contents for ExtremeCloud Appliance E1120




























































































































































































































Reviews:

No comments

Related manuals for ExtremeCloud Appliance E1120

ICP DAS USA ZT-2510 Series Quick Start Manual preview
ZT-2510 Series
Brand: ICP DAS USA Pages: 8
Accuphase AD-60 Instruction Manual preview
AD-60
Brand: Accuphase Pages: 2
ADTRAN ATLAS 550 Manual preview
ATLAS 550
Brand: ADTRAN Pages: 2
Acrosser Technology AMB-VDX3H1 Series Quick Start Manual preview
AMB-VDX3H1 Series
Brand: Acrosser Technology Pages: 4
LogLogic LX 1010 Quick Start Manual preview
LX 1010
Brand: LogLogic Pages: 30
Mercusys MR30G Quick Installation Manual preview
MR30G
Brand: Mercusys Pages: 35
National Instruments NI WLS/ENET-9163 User Manual preview
NI WLS/ENET-9163
Brand: National Instruments Pages: 36
NETGEAR RP614 v2 Installation Manual preview
RP614 v2
Brand: NETGEAR Pages: 2
Xircom RealPort Ethernet 10/100 User Manual preview
RealPort Ethernet 10/100
Brand: Xircom Pages: 30
Tektronix CTS 850 User Manual preview
CTS 850
Brand: Tektronix Pages: 178
Paxton Net2Air Ins-40085-US Quick Start Manual preview
Net2Air Ins-40085-US
Brand: Paxton Pages: 4
ZyXEL Communications GS3700 Series Handbook preview
GS3700 Series
Brand: ZyXEL Communications Pages: 215
NetComm 3G25W-R Manual preview
3G25W-R
Brand: NetComm Pages: 69
Baicells EG2013B-M11 User Manual preview
EG2013B-M11
Brand: Baicells Pages: 10
JUMO iTRON B 70.2040 Operating Instructions Manual preview
iTRON B 70.2040
Brand: JUMO Pages: 41
Advantech ARK-1380 User Manual preview
ARK-1380
Brand: Advantech Pages: 50
Handicare DX REM 420 User Manual preview
DX REM 420
Brand: Handicare Pages: 60
Zalip CDE570AM-U User Manual preview
CDE570AM-U
Brand: Zalip Pages: 76

Brands by name

Popular brands

Load more brands