Extreme Networks ExtremeCloud Appliance E1120 User Manual Download Page 79

Page: 79 / 219

Radio as a Sensor

on page 72

Advanced AP Radio Settings

on page 75

Adding or Editing a Configuration Profile

on page 68

ADSP Support on AP5xx

on page 79

ADSP Support on AP5xx

The following ADSP features are supported on the AP5xx:

•

LiveView under Sensor Mode

•

LiveView under Radio Share Mode

•

Scan Pattern Support from the ADSP Server for Sensor.

•

Termination under Sensor and Radio Share Modes.

•

Rogue AP on the Wired interface.

•

Threat detection and alarms are supported.

Note
AP Test is

not

supported.

Summary of Contents for ExtremeCloud Appliance E1120




























































































































































































































Search results

Summary of Contents for ExtremeCloud Appliance E1120

Reviews:

Related manuals for ExtremeCloud Appliance E1120

Brands by name

Popular brands

Extreme Networks ExtremeCloud Appliance E1120, User Manual

Search results

Summary of Contents for ExtremeCloud Appliance E1120

Reviews:

Related manuals for ExtremeCloud Appliance E1120

Brands by name

Popular brands