EVS XSnano, Configuration Manual

Page: 21 / 198

Configuration Lines
Command description Command icon
Renaming the configuration line
Entering the Configuration window to edit the settings related the
configuration line
Deleting the configuration line
Starting the server with the corresponding configuration line
Tools Menu
To call a Tools command, simply click on the command in the Tools menu. This will open
the corresponding window.
2.2. Configuration Lines
2.2.1. Chapter Contents
The table below presents the topics of this section and shows whether the feature
described is available from the web-based interface and/or from the server-based
interface.
Section Page Server-Based Web-Based
"Launching a Configuration" 2.2.2 Yes Yes
"Editing a Configuration" 2.2.3 Yes Yes
"Renaming Configuration Lines" 2.2.4 Yes Yes
"Exporting and Importing Configuration Lines" 2.2.5 Yes Yes
(one by one)
"Changing the Position of Configuration Lines" 2.2.6 Yes Yes
(indirectly)
"Copying, Pasting and Deleting Configuration
Lines" 2.2.7 Yes Yes
(indirectly)
CONFIGURATION MANUAL XSnano Server 12.02
2. Multicam Setup 11